767778
10
Zoom out
Zoom in
Previous page
1/40
Next page
10
GB INSTRUCTION OF USE
PART LIST
Please check the list of parts to ensure that all parts have been delivered:
Stroller main frame with Seat unit
1 canopy
1 front bar
4 wheels
2 wheel axles
1. UNFOLDING ( FIG. 1)
Release the transportation-lock. Open the stroller by grabbing the handle up until both side
catches are engaged.
2. FRONT & REAR WHEELS ASSEMBLY (FIG. 2A-2C)
The assembly of the front & rear wheels are the same:
Slide the wheel axle through the 2 rear legs (2a). Push the wheels onto the axle, the wheel is
locked when you hear a click sound (2b). Check the wheels are securely installed before use.
When changing the wheel, press the button and pull the wheel out (2c).
Attention: If this stroller comes with pneumatic tires, please check the air pressure.
You can pump the pneumatic tires with a tire pump. The tire pressure must not exceed 2.0 bar
(28 PSI).
3. BRAKE (FIG. 3)
You can press either the front wheel brake or rear wheel brake to stop the stroller. Press the
brake down by foot to stop the stroller and push the stroller to check. Attention: Always apply
brake(s) when parking the stroller.
4. ADJUSTING THE BACK REST (FIG. 4)
Pull the metal handle at the back of the backrest upwards and adjust the backrest to the desired
position. The backrest can be altered to 3 di󻉒erent positions.
5. ADJUSTING THE LEG REST (FIG. 5)
Press both (left & right) buttons to bring the leg rest to the desired position.
6. ADJUSTING THE HANDLES (FIG.6)
Press both (left & right) buttons on the handle and bring the handle height to the desired
position.
7. INSTALL THE FRONTBAR (FIG. 7A-7C)
Install the front bar by 󻉓xing it onto the 2 sides of the catches (7a). Test the front bar by pulling
on it to make sure it is locked to place.
To release the front bar, release the clip at the catches and pull the front bar out (7b). The front
bar can also be adjusted to the desired position by pressing the buttons on both sides (7c).
8. REVERSING THE HANDLE (FIG. 8A-8C)
Pull both plastic catches (left & right) upwards to release the handle position (8a). Release the
2nd safety lock (8b) and then swivel the handle to the opposite direction (8c). Please always
check if the handle has engaged in the new position completely. Front & rear wheels must be
additionally secured with both of the parking brakes when parking the stroller, if the handle is in
the position facing towards the child.
9. ASSEMBLE THE CANOPY (FIG.9)
Insert the canopy plastic clamps into the housings on the 2 sides of the seat.
10. FOLDING AWAY (FIG. 10A-10D)
Make sure the handle is at the canopy side, and the backrest is in the lie down position. Fold
the canopy backward. Press the 2 nd lock button down 󻉓rst (10a), then pull the folding levers,
on both sides, upwards (10b), push the handle bar to the front and let the stroller collapse (10c).
Ensure the stroller is closed by the transportation lock on the side of the frame (10d).
11. SECURE THE CHILD IN THE SEAT (󻉓g 11):
Place the child in the seat and push the clips on the waist belt into the buckle on the crotch belt
(the one that comes between the child’s legs). Adjust the length of the belt to your child’s needs.
Always ensure the straps are not twisted or caught on the stroller frame. Check the adjustment
every time you place the child in the seat and when the backrest is reclined. To release the
harness, squeeze & open the buckle.
Harness adjustment: Insert both fasteners (B) into the buckle (A), ensure that both buttons click
into position. Ensure both shoulder straps (C) are attached to the fasteners (B). Each strap has
its own length adjuster (D). To undo the harness, press the button and pull apart. “D” Rings are
provided for 󻉓tment of a full safety harness. The attachment points (D-rings) are located on side
straps.
WARNING: (A child’s safety is your responsibility.) The child should be harnessed in at all times
and should never be left unattended. The child should be clear of moving parts while making
adjustments. This stroller requires regular maintenance by the user.
Attention: Avoid serious injury from failing and sliding out, always use seat belt & always use as
instructed. Never use the harness without the shoulder straps.
12. ADJUSTING THE SHOULDER HARNESS (󻉓g. 12)
There are 2 shoulder harness heights available in the stroller, use the slot closest to child’s
shoulder height.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hauck Ontario at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hauck Ontario in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info