549803
65
Zoom out
Zoom in
Previous page
1/78
Next page
Press one of the memory buttons M1 or M2 and the result is
placed in the selected measurement memory. The selected
measurement memory number appears on the display. The re-
sult is stored in the measurement memory selected when the
device is switched off. If a measurement results in an error, it is
not stored (fig. 7).
In order to switch off the
device, press the blue START/
STOP button. Otherwise the
device will switch itself off
automatically after 3 minutes.
Important: If you wish to
repeat the measurement,
allow the wrist to rest for at least 1 minute.
Automatic repeat pumping function
The inflation pressure for each measurement is automatically
set at approx. 190 mmHg. If this pressure is insufficient or if
the measurement is interrupted, the device continues to pump
at a rate of 40 mmHg until a high enough pressure is reached
so that the measurement can start. If you require a higher
inflation pressure, you can avoid having to repeat pumping by
pressing the blue START/STOP button again shortly after
inflation starts and holding down on it until the desired cuff
pressure is reached. This should be approx. 30 mmHg over the
systolic (upper) value. The pressure can be increased to approx.
280 mmHg.
5. Setting the memory function
5.1 Saving the measured values
The measurement result is stored either in M1 or M2. Select the
memory position after measurement. Each of the two memory
positions can store 30 measurement results and the average
value of the results. Once the number of measurements
65
6
7
English
*GA Tensoval mobil classic 02.03.10 14:11 Seite 65
65


Need help? Post your question in this forum.

Forumrules
1

Forum

hartmann-tensoval-mobil-classic

Reset search

  • Hi i wanted to use the power supply, bought to types of port but its not working. pls help
    Submitted on 23-3-2023 at 04:31

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hartmann Tensoval mobil classic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hartmann Tensoval mobil classic in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 4,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hartmann Tensoval mobil classic

Hartmann Tensoval mobil classic Additional guide - English, German, Dutch, French, Italian - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info