549802
130
Zoom out
Zoom in
Previous page
1/146
Next page
132
indicate that the necessary inflation
pressure has been reached, and
that measurement is starting. Then
the measuring procedure begins
with the release of the air.
If you require a higher
inflation pressure, you can
avoid having to repeat pumping by
pressing the blue START / STOP
button again after inflation starts
and holding down on it until the
desired cuff pressure is reached.
This should be approx. 30 mmHg
over the systolic (upper) value.
You can track the measuring
progress via the progress bar. This
increases during the inflation phase
and decreases in the measuring
phase. During the measuring
phase, you will also see the sym-
bols for the two Duo Sensor
Technology measuring methods.
These indicate that the sensors are
functioning correctly. In addition,
the heart symbol shows your pulse
rate, which is also measured.
A long beep indicates the end of
measurement. Then the systolic and
diastolic blood pressure values
appear simultaneously one below
the other on the display as well as
the pulse rate.
Important: You should not
move or talk throughout the
entire measuring procedure! If you
wish to stop the measuring proced-
ure for any reason, simply press the
START / STOP button. The inflation
or measuring procedure is inter-
rupted and an automatic fall in
pressure occurs.
If you see this symbol under
the pulse rate, then the device has
detected an irregular heartbeat
during the measurement. But it is
also possible that the measurement
was falsified by body movement or
talking. The best thing to do is to
repeat the measurement. If you
regularly see this symbol when
measuring blood pressure, we rec-
ommend that you have your heart
rhythm checked by your doctor.
Once the measurement is finished
or
is displayed on the left.
represents the measured values
1
1
TIME
130


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hartmann Tensoval duo control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hartmann Tensoval duo control in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 10,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hartmann Tensoval duo control

Hartmann Tensoval duo control Additional guide - English, German, Dutch, French, Italian - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info