Manual Hartke KM100 (page 11 of 60) (English, German, French, Italian, Spanish)

624015

Zoom out

Zoom in

1/60

ENGLISH

Setting Up and Using Your Hartke KM60 and

KM100 Keyboard Amplifier

KM200 Basic Operation

Setting up your Hartke KM60 or Km100 Keyboard amplifier is

a simple procedure which takes only a few minutes:

1. Remove all packing materials (save them in case of need

for future service) and decide where the amplifier is to be

physically placed. To avoid potential overheating problems,

be sure that the rear panel is unobstructed and that there is

good ventilation around the entire unit.

2. Connect the 3-pin AC plug into any grounded AC socket.

Don’t turn the amplifier on just yet, though.

3. Use standard music instrument cables to connect your

keyboards and/or drum machines to the appropriate Input

jack, or jacks, on the rear panel. If you want to connect a

microphone, connect a low impedance mic to the Channel 1

XLR mic input located on the front panel.

4. Set the main Volume control to “0” (fully counterclockwise

and set channel volume knobs to “5” (the twelve o’clock posi-

tion). Then, set the graphic equalizer sliders to the middle

0dB position.

5. Press the front panel Power switch in order to turn on the

amplifier.

WARNING: Hartke amplifiers can deliver very high power

levels. Driven to full power, they can damage connected

loudspeakers, regardless of brand, size, or configuration.

Care should be taken not to strain connected loudspeak-

ers as this can cause permanent damage and will degrade

the performance of the entire system. If you see connect-

ed loudspeakers moving excessively, turn your system

down immediately or use the equalization and/or com-

pression controls to reduce the amount of sub harmonic

(extremely low frequency) signal.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hartke KM100 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 4,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hartke KM100 Manual

Product: