624011

Hartke Kilo Manual

9
Zoom out
Zoom in
Previous page
1/96
Next page
Kilo • 1000 Watt Bass Amplier
9
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
8. MUTE Switch – When engaged, this orange backlit switch mutes all of the out-
puts exept the front and rear panel TUNER outputs. A footswitch can be connect-
ed to the amplier to control muting (the front panel switch is disengaged when
the footswitch is plugged in).
9. GAIN – This control adjusts the amount of level provided to the tube preamp
stage. The Peak light (see #10) will illuminate if the input signal is clipping the
preamp stage, which indicates unwanted distortion. Turn the GAIN control down
until the Peak light lights only occasionally.
10. Peak Light – This red light illuminates when clipping occurs in the preamp signal
path. If you notice that the Peak light is continuously lighting, turn the GAIN con-
trol down until the Peak light lights only occasionally.
11. BRITE Switch – When pressed, this green backlit switch boosts the high frequency
output by 6 dB.
12. SHAPE – The Shape circuit applies a pre-set equalization curve with a slight lift in
the low frequencies, a cut in the mids, or a slight lift in the highs, depending on
its setting. The SHAPE control knob is used to set the center cut frequency for the
Shape circuit.
13. SHAPE Switch – This green backlit switch is used to engage the Shape circuit (see
#12). For additional control on stage, the SHAPE switch can be controlled using a
footswitch (the front panel switch is disengaged when the footswitch is plugged
in).
14. BASS – As part of the passive tone stack equalizer, this control is used to adjust
the low frequency response.
15. DEEP Switch – When engaged, this green backlit switch boosts the low frequency
response of the signal.
16. MID – As part of the passive tone stack equalizer, this control is used to adjust the
mid-range frequency response.
17. EFX Switch – When selected, this green backlit switch sends the signal to the rear
panel EFFECTS SEND jack, allowing you to globally turn on and o the signal from
your outboard eects for added tone control. A footswitch can be connected to
control the EFX switch (the front panel switch is disengaged when the footswitch
is plugged in).
18. TREBLE – As part of the passive tone stack equalizer, this control is used to adjust
the high frequency response.
19. GEQ Switch – When this green backlit switch is pressed, the graphic equalizer
circuitry is operational. When the switch is disengaged, the circuity is bypassed.
This switch allows you to set up a custom equalization curve with the graphic EQ
sliders, which can then be activated with the press of a single button. A footswitch
can be connected to control the GEQ switch (the front panel switch is disengaged
when the footswitch is plugged in).
Front Panel Controls
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hartke Kilo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hartke Kilo in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 16,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info