629762
9
Zoom out
Zoom in
Previous page
1/12
Next page
HD Series Combos
9
Setting up your Hartke HD Series Combo Bass Amplifier is a simple procedure which
takes only a few minutes:
1. Remove all packing materials and decide where the amplifier is to be physically
placed.
2. Before you plug-in the power cable, be sure the Power switch is in the off posi-
tion. Connect the supplied power cable to the AC inlet located on the rear panel.
Then, plug-in the 3-pin AC plug into any grounded AC socket.
3. Use a standard ¼” instrument cable to connect your bass to the Input jack on the
front panel.
4. On the top panel of the amplifier, turn the Volume the minimum (fully coun-
terclockwise) position, set all EQ knobs to their twelve o’clock position and the
7-band graphic EQ sliders to the center position.
5. Press the rear panel Power switch in order to turn on the amplifier.
6. Set the output of your bass to maximum and then, while playing, slowly turn the
Volume control up until the desired level is achieved.
7. Adjust the equalization controls to taste.
8. Test the headphone output by turning the Volume control to its minimum (fully
counterclockwise) position and then connect a pair of headphones to the top-pan-
el Phones jack. While playing your bass, slowly turn the Volume control up, you
should hear sound from the headphones and none from the connected speaker.
9. The HD Series amplifier features an AUX INPUT that you can use with a portable
CD or MP3 player to play with prerecorded tracks. You can plug any line level
signal into the AUX INPUT including the signal from a keyboard or drum machine.
Connect the line level device to the AUX INPUT using standard 1/8” cable. You
will need to use the volume control on the input device to set the balance between
the track and your bass. So, start with the volume control all the way down and
slowly raise it until you reach a good balance with your bass.
Quick Start
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hartke HD150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hartke HD150 in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info