629762
6
Zoom out
Zoom in
Previous page
1/12
Next page
6
1. INPUT - Connect your bass guitar here using a standard ¼” unbalanced instru-
ment cable.
2. VOLUME Control - This is the overall volume control. For best signal-to-noise ratio,
keep the output of your bass at or near maximum and adjust the VOLUME to the
desired level.
3. BASS Control - This control is used to adjust the low frequency response. As it is
turned clockwise the frequency area is boosted; as it is turned counterclockwise
the frequency area is attenuated.
4. MID Control - This control is used to adjust the mid frequency response. As it is
turned clockwise the frequency area is boosted; as it is turned counterclockwise
the frequency area is attenuated.
5. TREBLE Control - This control is used to adjust the high frequency response. As it
is turned clockwise the frequency area is boosted; as it is turned counterclockwise
the frequency area is attenuated.
6. Graphic Equalizer - These sliders allow you to “draw” the tonal response of the sys-
tem by adding 12 dB of boost or attenuation to seven different frequency bands.
7. AUX INPUT - Use this ¹⁄8” input to connect a line level device like a portable CD or
MP3 player.
8. Effect SEND jack - Use this ¼” unbalanced jack to send signal from the HD75 to
outboard effects processors. In-line effects, such as stomp boxes, intended for
low signal levels should be placed between the bass and the amplifier input and
not connected with the Effect Send and Return jacks. You can also use the Effect
Send jack to route signal to an external mixing console or amplifier with an input
sensitivity of +4 dB.
9. Effect RETURN jack - Use this ¼” unbalanced jack to return low impedance signal
to the HD75 from an outboard effects processor.
10. Headphones jack - Connect headphones to this standard ¼” jack. When a plug is
inserted into the headphone jack, the speaker output is disconnected, allowing
you to use your HD75 as a practice amplifier.
HD75 Top Panel Controls
1 2 3 4 5 6 7 8 9
10
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hartke HD150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hartke HD150 in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info