624013
10
Zoom out
Zoom in
Previous page
1/72
Next page
Guided Tour - Model 3500/5500 Rear Panel
1. Fuse sled - This contains a fuse holder and shows the currently selected
voltage rating for your Model 3500/5500. Make sure the voltage rating is cor-
rectly set before powering up the amplifier! Fuse ratings are 10 amp for 115
vac and 6.2 amp for 230 vac. For information on how to change the voltage
rating, see Appendix B on page 14.
2. AC input - Connect the supplied standard 3-pin “IEC plug here.
3. Speaker outputs - Connect any 4, 8, or 16 ohm bass cabinet(s) to these
standard unbalanced 1/4” jacks. WARNING: Because of the high power levels
and low frequency content of the signal generated by the Model 3500/5500,
use only appropriately rated speaker cabinets (at least 600 watts at 4 ohms)
that are specifically designed for bass instruments. We recommend that
Hartke amplifiers be used with Hartke bass cabinets, although other brands of
speakers can be used.
4. Fan - The fan provides vital cooling to your Model 3500/5500. Make sure
that it is kept free of all obstructions and that cool, fresh air is accessible at all
times. Also, try to ensure that the Model 3500/5500 is used in a dust-free
environment.
5. Effect Send jack - Use this 1/4” unbalanced jack to send low impedance (100
ohm) signal from the Model 3500/5500 to a professional outboard effects proces-
sor such as a reverb, echo, chorus, flanger, or harmonizer device.* Output level is
approximately 0 dB to +4 dB and is post-EQ and post-compression but unaffected
by the setting of the Master Volume control. You can also use the Effect Send jack
to route signal to an external mixing console or amplifier with an input sensitivity
of +4 dB.
EFFECT
SEND
RETURN BALANCE
DIRECT OUT
0
SEND RETURN
POST
PRE
NORMAL
GND LIFT
2
1
4
3
5 8 9
3
6 7
10
SPEAKER
OUTPUTS
87
87
ENGLISH
6
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hartke HA3500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hartke HA3500 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info