12
Instructions
Unfolding the pram
By pushing the lock buttons 4, unfold the upper section to bring the
handle in horizontal position. Pull handle 1 upwards until handle catch 2
has engaged.
WARNING! Before using the pram, make sure all catches are locked.
Folding the pram
Turn safety turn-lock 3 inward until the handle's 1 catch has released.
Push handle downwards to fold the pram. By pushing the lock buttons 4,
fold the handle's upper section inward.
WARNING! We recommend proceeding with caution when folding
and unfolding the chassis, and adjusting the backrest, as there is a risk
that you do yourself an injury such as jamming your limbs, fingers, etc.
Changing of wheels
Press the retaining spring 5 and pull off the wheel. To reassemble
the wheel, also press retaining spring and slide it on the axle to the stop.
Make sure, spring snaps back in its correct position.
Replacement of brake disk and drum brake
Press the two push buttons at both sides of the front wheel and remove
the front wheel unit. Pull the brake assembly housing 6 off the axle.
Extract the blue brake disk from the wheel, using a screw driver as a lever.
Press the replacement disk onto the axle to the stop.
Parking brake
Always press the brake at a point in the middle of the linked bars 7.
Having parked the pram, try to push it to check the brake.
WARNING! Always press the brake right down to the latching
position.
Adjustable suspension system
By turning the selector 8, a "hard" or "soft" position can be selected for
suspension.
Readjustment of hand brake
This is effected by turning the brake cable adjusting barrel 9.
WARNING! You should prevent operating the drum brake continually
for long periods as there is a risk of fade. Brake fade is a temporary loss,
or reduction, of brake effectiveness caused by heat. A high performance
brake for extreme operating conditions is optional as accessory.
