815495
13
Zoom out
Zoom in
Previous page
1/28
Next page
Harman® • XXV-TC Owner’s Manual_R28 • 2018 -___ • 08/2313 3-90-00680C
C. Unit Maintenance
Daily/Weekly Maintenance:Itisrecommendthattheburn
potbescrapedwheneveraddingfuel;takingtheopportunity
tocleantheburnpotwillinsureproperdailyoperation.
Scraping the Burn Pot-
• Usingameresistantgloves,vigorouslyscrapethetop
holedsurfaceandsidesoftheburnpotdowntoauger
tube,besuretoconcentrateintheneckoftheburnpot.
Figure 2.1.
• Scrapeloosenedmaterialoveredgeofburnpotgrateinto
the ashpan.
If needed, empty the ash pan while adding fuel and after
scrapingtheburnpot.
Figure 2.1
Monthly Maintenance: It is recommend that the unit
be shut down and unplugged from any power source for
a monthly cleaning. Monthly cleanings will insure proper
operation of your unit throughout the heating season.
• CleaningGlass-Onceunitiscold,useanon-abrasive
glass cleaner on glass and wipe clean.
• ScrapeandVacuumHeatExchanger.
Cleaning the Heat Exchanger-
CleantheheatexchangerwithscraperasshowninFigure
2.2.Brushorscrapetheinsideofthestovetoremoveyash.
Remove the ash pan and dispose of ashes in an approved
manner, according to local codes.
Figure 2.2
Scrape heat
exchanger
with arrow
scraper tool.
Cleaning the Burn Pot-
Vigorously scrape the top holed surface and sides of the
burnpotdowntoaugertube,assuggestedintheDaily/
Weekly Maintenance Section.
• Usethesuppliedallenwrenchtoremoveanybuild-upthat
mayhaveaccumulatedintheholesoftheburnpotgrate.
Simply push the allen wrench down through each hole
ensuringitisclearofanybuild-uppayingattentionnotto
damage the igniter element in the process. Figure 2.6.
Figure 2.3
Disconnect the power to the unit before removing
cover.
!
DANGER
Figure 2.4
WingThumbScrews
• Loosenthe(2)wingthumbscrewsonthelowerfrontangle
oftheburnpot.Figure2.4
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman XXV-TC - Pellet at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman XXV-TC - Pellet in the language / languages: English as an attachment in your email.

The manual is 6.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info