168252
21
Zoom out
Zoom in
Previous page
1/36
Next page
For standard low-level (preamp-
IVlUbl
level
aPPr(
chass
3
o'c
The
l
level) inputs:
""--*
head units provide a nominal low-
(preamp level) output signal of
)ximately 500mV. On your amplifier
;is is a dot indicator located at the
lock position on the INPUT control.
...-
lNPUT control should be set to this
position for normal preamp-type head units.
If the system does not distort when tested,
and plays loudly enough, leave the INPUT
control at this setting. However, if opera-
tion is not satisfactory, or your head unit has
a non-standard output signal. use the
adjustment method described in the
following section.
For nonstandard low-level
(preamp-level) and high-level
(speaker-level) inputs:
Turn the INPUT SENSITIVITY control all
the way down to MIN (full counterclock-
wise). Select well-recorded, full-range
music that you are familiar with to use as
source material. Proceed with testing the
system by momentarily advancing and
reducing the head unit volume control in
successively higher levels as follows:
If no distortion is present and the system
plays loudly enough, leave the INPUT
control at the MIN position.
If no distortion is present and the system
does not play loudly enough, turn up the
INPUT control approximately
118
of its
rotation clockwise and retest the system
for undistorted (unclipped) output.
Proceed with successively higher INPUT
control settings until the system is loud
enough and no distortion is present. If
you hear any distortion (clipping) at a
new setting, reposition the INPUT control
to its previous test setting and leave it
there.
Note:
If the head unit is a preamp-level-
type, you may want to advance the
INPUT control in larger steps until it
reaches the
12
o'clock position to reduce
the number of test steps.
Some high-level (speaker-level) connec-
tions may result in a limitation of the usable
volume control range. In this case, you can
obtain additional range in your volume
control
by
installing a line-level adaptor,
commonly available from your autosound
dealer.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon tc 600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon tc 600 in the language / languages: English as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info