If the soundbar does not turn ON• Check if the soundbar power supply’s AC cord is plugged into a working AC
outlet and that the power supply is plugged into the soundbar.
If the subwoofer does not turn ON• Check if the subwoofer’s power cord is plugged into a working AC outlet.
• Press the Power switch of the subwoofer.
• Check if the subwoofer’s AC fuse has blown. See Subwoofer Rear Panel
Controls.
If there is no sound coming from both the soundbar and the subwoofer• Check if soundbar is ON (the Power Indicator should be white).
• Check if the cable connecting the TV or other source component to
soundbar is properly connected at both ends.
• Check if the soundbar’s Source Selector is set to the correct source and that
source is playing an audio signal.
• Check if the system is not muted. If the system is muted, press the volume
buttons to un-mute the system.
• Check if the soundbar’s volume is not turned all the way down (the lowest
setting of the Volume Down button will mute the system).
If there is no sound coming only from the subwoofer• Check if the Subwoofer Volume Control is not turned all the way down
using the remote control.
• Check if the wireless connection is still active (Blue LED constant in the
back of the subwoofer). If the LED is flashing blue, then restart the pairing
process.
• Move the subwoofer closer to the soundbar. The maximum wireless
operation distance is 50 feet (15.3 m).
If the soundbar’s sound is distorted• Check the source component to see if the distortion is coming from it, and
not from soundbar.
If there is sound from the system, even when the soundbar’s volume is turned
all the way up
• If the TV or source component is connected via a variable output, check its
instructions if the output is not turned down too low.
If the bass output is not loud enough• Turn up the subwoofer’s volume using the remote control.
• Move the subwoofer at a corner of the room.
• Move the subwoofer closer to the seating location.
The volume is reset when I turn on the soundbar• This is actually an inbuilt feature of the soundbar. If the soundbar is playing
at more than 50 percent of maximum volume and the power is turned off,
the volume of the soundbar is automaticalluy reset to 50 percent of the
maximum volume when the system is turned ON.
My TV is ON and my SB26 is in Standby. When I switch off my television, it
turns my SB26 ON
• This is actually related to some issue on some television having wrong Hot
Plug Detection (HPD) protocol. You can activate/deactivate HPD protocol by
pressing the Volume – and Surround buttons simultaneously.
Troubleshooting
If your SB26 system does not perform the way you think it should, check whether the problem is covered in this section before contacting your dealer or a
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Harman Kardon SB26 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Harman Kardon SB26 in the language / languages: English as an attachment in your email.
The manual is 0,99 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
