534569
7
Zoom out
Zoom in
Previous page
1/16
Next page
7
SB 30
ENGLISH
Remote Control Functions
Mute
Button
Power
Button
Volume Down
Button
Volume Up
Button
Surround Mode
Button
Dolby Volume
Button
Room Size
Button
Source Selector
Button
Mute button: Press this button to mute the system (the soundbar Power LED will flash
blue); press again to unmute the system.
Power button: When the soundbar is in the Standby mode (the soundbar Power LED is
amber), pressing the Power button will turn on the soundbar. When the soundbar is on
(the Power LED is blue), pressing the Power button will put it into the Standby mode.
Volume Down/Up buttons: Press the “–” button to decrease the volume; Press the “+”
button to increase the volume.
Surround Mode button: Pressing the Surround Mode button cycles the soundbar’s audio
output through the following three surround modes: Stereo > Virtual > HARMAN Wave >
Stereo, etc. The active surround mode is indicated by the soundbar Status LEDs (see
Soundbar Status LEDs
, on page 5). See
Surround Modes
,
on page 11, for information
about the surround modes.
Dolby
®
Volume button: Pressing the Dolby Volume button cycles the Dolby Volume
setting among Off, Low and High. The active setting is indicated by the status LEDs (see
Soundbar Status LEDs
,
on page 5). See
Dolby Volume
, on page 12, for more information
about Dolby Volume.
Room Size button: The Room Size button lets you tailor the soundbar’s energy field in
the HARMAN Wave surround mode to match the size of your listening room. See
Surround
Modes: HARMAN Wave
, on page 12, for more information.
Source Selector button: Pressing the Source Selector button changes the active input
source among the Optical Digital, Coaxial Digital and Analog input connectors. The active
input source is indicated by the status LEDs (see
Soundbar Status LEDs
,
on page 5).
Place the Soundbar and Subwoofer
Placing the Soundbar on a Table
If your TV is placed on a table, you can place the soundbar on the table directly in front of
the TV stand, centered with the TV screen. Attach the supplied rubber feet to the soundbar
as shown in the illustration and set the soundbar’s EQ switch in the “Table” position.
As long as the table’s surface is flat, the soundbar will rest on the rubber feet.
Wall-Mounting the Soundbar
If your TV is attached to a wall, you can use the included wall-mount brackets to mount
the soundbar on the wall directly below the TV screen.
1. Determine the location for the soundbar on the wall. Make sure that the top of the
soundbar will not block your view of the TV screen when it is mounted on the wall.
2. Mark the locations of the soundbar wall-mount bracket holes on the wall. The holes
for the left and right brackets are spaced 830mm apart and are designed to accept
#8 screws. The top and bottom holes for each bracket are spaced 25mm apart. See
the illustration below.
830mm
25mm
NOTE: To ensure that the soundbar will be level, use a carpenter’s level, laser sight or
other device to ensure that the two sets of holes are at exactly the same height.
3. Attach the two wall-mount brackets to the wall at the locations you marked, using
hardware that is appropriate for the wall’s construction and materials. Note that
the soundbar weighs 8.4 lb (3.8kg). Be sure to use hardware that can support this
weight.
4. Set the soundbar’s EQ switch in the “Wall” position.
Remote Control Functions and Placing the Soundbar and Subwoofer
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon SB 30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon SB 30 in the language / languages: English as an attachment in your email.

The manual is 4,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon SB 30

Harman Kardon SB 30 User Manual - Dutch - 16 pages

Harman Kardon SB 30 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info