502815
5
Zoom out
Zoom in
Previous page
1/12
Next page
Unpacking and Installation / Rear Panel Connections
3
Unpacking and Installation
The carton and shipping materials used
in protecting your new amplifier were
specially designed to cushion it from the
shocks and vibration of shipping. We
suggest that you save the carton and
packing materials for use in shipping if
you move or if the unit ever needs repair.
To minimize the size of the carton in
storage, you may wish to flatten it.
Carefully remove any staples used to
close carton seams; carefully slit the tape
on the bottom and collapse the carton.
Other cardboard inserts may be stored in
the same manner. Packing materials that
cannot be collapsed should be saved
along with the carton in a plastic bag.
When positioning the amplifier in its
final location, make certain that it has
adequate ventilation on all sides, as well
as on the top and bottom. Do not place
CDs, record jackets, owner’s manuals or
other paper on top of, or beneath the
unit, or in between multiple amplifiers in
a stack. This will block the air flow, caus-
ing degraded performance and a possible
fire hazard. If the unit is to be enclosed
in a cabinet or rack, make certain that
there is adequate air circulation, with
means provided for hot air to exit and for
cool air to be brought in.
¡ Speaker Outputs: Connections from these terminals should be made to the appropriate speakers in your system.
Audio Inputs: Connect the outputs of the PT2500, ADP303 or other surround processor, preamplifier or decoder to
these jacks.
£ AC Power Cord: Connect this plug to a wall-mounted AC outlet. Due to the current draw of the PA5800, it is NOT
recommended that the accessory outlets on the back of the audio/video components be used to power this
product.
¢ Remote Amp Trigger In: Connect this jack to the matching trigger output on a PT2500 or other compatible device
to have the PA5800 automatically turn on when the device is activated. See page 4 for additional details.
Note: To assist in the installation of this product, the numbers used in this diagram appear in the manual to guide you to
rear panel connections.
CHANNEL ONE (FRONT RIGHT)
CHANNEL TWO (SURROUND RIGHT) CHANNEL THREE (FRONT CENTER) CHANNEL FOUR (SURROUND LEFT) CHANNEL FIVE (FRONT LEFT)
4 OHMS
SPEAKER
IN
4 OHMS
SPEAKER
IN
4 OHMS
SPEAKER
IN
4 OHMS
SPEAKER
IN
8 OHMS
SPEAKER
IN
AC INPUT AC 12OV/60Hz 340W
POWER AMP
TRIGGER IN
WARNING: SHOCK HAZARD - DO NOT OPEN
AVIS: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR
MODEL NO. PA5800
HARMAN KARDON
NORTHRIDGE
CALIFORNIA, USA
MADE IN USA
SERIAL NO.
12345
CAUTION
E160812
596D
LISTED
AUDIO SYSTEMS
RISK OF ELECTRIC
SHOCK. DO NOT OPEN
¡™¢£
Rear Panel Connections
HK1346 12.21.98 1:52 PM Page 5
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon PA5800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon PA5800 in the language / languages: English as an attachment in your email.

The manual is 0,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info