456576
18
Zoom out
Zoom in
Previous page
1/30
Next page
18
18 19
= Learning-Capable
Teaching Codes to the Remote Control
Place the 1. HS 280/HS 210 remote head to head with the remote from which
you want it to learn codes. Put them about 1 inch (2.5cm) apart, with their IR
transmitter windows facing each other.
Press and hold either the TV or Video button on the 2. HS 280/HS 210 remote.
Learn Button
TV Button
Video Button
Learn Button
TV Button
Video Button
While pressing the TV or Video button, press and hold the Learn button until its 3.
LED begins flashing amber. (The TV or Video button will not flash but will remain
steadily illuminated.) The flashing indicates that the remote is in the learning
mode.
Press the 4. HS 280/HS 210 remote button to which you want to teach the
command. The Learn buttons LED will then illuminate continuously. The learning
mode will remain active for 20 seconds after the button is pushed.
NOTE: If you accidentally press a button that is not learning-capable, the Learn
button's LED will continue to flash amber and the remote will remain in the learning
mode.
Press the button on the other remote that you want to “teach” the 5. HS 280/HS 210
remote. When the HS 280/HS 210 remote has received and stored the other
remote's IR code, the Learn button’s LED will change to green, and the HS 280/
HS 210 remote will remain in the learning mode, ready to learn another code.
NOTE: If the HS 280/HS 210 remote can’t read the IR code from the other remote,
the Learn buttons LED will flash red rapidly three times, and the remote will remain
in the learning mode. Resume programming from Step 4. If the HS 280/HS 210’s
remote control does not receive an IR code within five seconds, the Learn button's LED
will flash red rapidly three times, and the remote will remain in the learning mode.
Resume programming from Step 4.
Repeat 6. Step 3 and Step 4 for each command you want to teach the HS 280/HS 210
remote. You can switch between programming TV and video component codes
by pressing the TV or Video button before resuming Step 4. NOTE: If the Learn
button’s LED goes out at any time, you will need to repeat Step 2 through Step 6.
Using the Remote Control After it is Programmed
Pressing the remote’s TV button will put the remote into the TV-control mode. It will
control the TV via the codes you have programmed into it. Pressing the remotes Video
button will put the remote into the video-control mode, and it will control the video
component via the codes you have programmed into it.
To switch the remote control back to the HS 280/HS 210 receiver-control mode from
the TV-control or video-control mode, press any of these buttons: Disc, Radio, USB,
Network, Activity or Bookmark.
Setting up the Receiver
NOTE: The on-screen menus shown in this manual are for illustrative purposes and
may differ slightly from the actual displays.
Using the On-Screen Menu System
When you turn your HS 280/HS 210 receiver on for the first time, the on-screen menu
will display the Activity menu. This menu acts as the HS 280/HS 210’s “home screen.
All of the HS 280/HS 210’s on-screen functions originate in the Activity menu.
To operate your HS 280/HS 210 system, you will use the remote control to navigate
through all of the on-screen menus and make selections from them.
Cursor Buttons
Enter Button
Enter Button
Cursor Buttons
= Learning-Capable
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon HS 280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon HS 280 in the language / languages: English as an attachment in your email.

The manual is 4,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon HS 280

Harman Kardon HS 280 User Manual - German - 30 pages

Harman Kardon HS 280 User Manual - Dutch - 30 pages

Harman Kardon HS 280 User Manual - French - 30 pages

Harman Kardon HS 280 User Manual - Italian - 30 pages

Harman Kardon HS 280 User Manual - Spanish - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info