Manual Harman Kardon HKTS 60 (page 7 of 12) (English)

534546

Zoom out

Zoom in

1/12

6 7

ENGLISH

Wall-Mounting: Center Speaker

Decide on the location for the speaker (see 1. Speaker Placement, on page 5).

Attach the center speaker wall-mount bracket to the wall using hardware that is 2.

appropriate for the wall’s construction and materials. Attach the anchors through the

holes shown in the illustration.

Use These Holes

to Attach Bracket

to Wall

NOTE: The center speaker weighs 3.3 lb (1.5kg). Be sure to use hardware that can support

this weight.

CAUTION: Before making speaker connections, be sure that your receiver or amplifier is

turned OFF and preferably, its AC cord is unplugged from the AC power source.

Connect the speaker wire to the speaker terminals. Press down on the top of the terminal

to open the connection hole, insert the wire’s bare end all the way into the hole and

release the terminal to secure the wire. Insert the conductor with the colored band

into the speaker’s red ( + ) terminal, and insert the other conductor into the speaker’s

black ( – ) terminal, as shown in the illustration.

–

A. Push Down on Cap to

Open Hole

B. Insert Bare Wire into

Open Hole

C. Release Cap to Secure Wire

IMPORTANT: Make sure the ( + ) and ( – ) bare wires do not touch each other or the

other terminal. Touching wires can cause a short circuit that can damage your receiv

er or amplifier.

Using two of the supplied screws, attach the center speaker to the wall-mount 4.

bracket, as shown in the illustration.

Supplied Screws

Wall-Mount

Bracket

Speaker Connections

CAUTION: Before making speaker connections, be sure that your receiver or amplifier is

turned OFF and preferably, its AC cord is unplugged from the AC power outlet.

Speakers and receivers/amplifiers have corresponding ( + ) and ( – ) connection

terminals. Most electronics manufacturers, including Harman Kardon, use red to denote

the ( + ) terminal and black for the ( – ) terminal. Newer Harman Kardon receivers

conform to the CEA standard and therefore use a color other than red to denote the ( + )

terminal for some speaker positions. See the table in Color-Coding System, on page 5.

Each speaker wire included with your system has colored bands at both ends of the ( + )

conductor, and the subwoofer cable has purple connectors that correspond to the color of

the HKTS200SUB’s LFE jack. This system helps ensure that the speaker in each location is

connected to the correct receiver or amplifier terminals. In addition to the colored bands

at each end, each speaker wire’s ( + ) terminal has ribs molded into its insulation to help

identify it.

It is very important to connect each speaker identically: ( + ) on the speaker to ( + ) on

the receiver or amplifier, and ( – ) on the speaker to ( – ) on the receiver or amplifier.

Miswiring one or more speakers results in thin sound, weak bass and a poor stereo

image. With the advent of multichannel surround-sound systems, connecting all of the

speakers in your system correctly is very important to achieving the proper ambience and

directionality of the program material.

To connect the speaker wire to the terminals on the satellite and center speakers, press

down on the top of the terminal to open the connection hole, insert the wire’s bare end

all the way into the hole and release the terminal to secure the wire. Insert the conductor

with the colored band into the speaker’s red ( + ) terminal, and insert the other conductor

into the speaker’s black ( – ) terminal, as shown in the illustration.

–

A. Push Down on Cap to

Open Hole

B. Insert Bare Wire into

Open Hole

C. Release Cap to Secure Wire

IMPORTANT: Make sure the ( + ) and ( – ) bare wires do not touch each other or the

other terminal. Touching wires can cause a short circuit that can damage your receiver or

amplifier.

Connecting Satellite Speakers With Supplied

Wall-Mount Brackets

Follow the instructions in Wall-Mounting: Satellite Speakers, on page 5, and

Wall-Mounting: Center Speaker, opposite.

Connecting Satellite Speakers with Supplied Bases

Remove the speaker’s base (see1. Shelf Placement, on page 5).

Pass the speaker wire through the opening in the speaker base.2.

Connect the speaker wire as described above.3.

Reattach the speaker’s base as shown in the illustration.4.

0176CSK - HK HKTS60BQ-230 v2 press.indd 7 13/11/09 11:24:29

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon HKTS 60 in the language / languages: English as an attachment in your email.

The manual is 2,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon HKTS 60

Harman Kardon HKTS 60 User Manual - Dutch - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Harman Kardon HKTS 60 Manual

Product: