769908

Harman Kardon HKTS 200 SUB Manual

4
Zoom out
Zoom in
Previous page
1/6
Next page
4
HKTS 210 SUB/HKTS 200 SUB Connecting the Subwoofer
Connecting the Subwoofer
Connecting the Subwoofer to a Receiver or Preamp/Processor
With a Dedicated Subwoofer Output
(HKTS 210 SUB only):
Set Input Mode
Switch to “LFE”
LFE/Trigger Cable
(supplied)
Use this installation method for receivers and preamps/processors that have a dedicated
subwoofer output with low-pass filtering (also called bass management). If the dedicated
subwoofer output does not have low-pass filtering, follow the instructions in Connecting
the Subwoofer to a Receiver or Preamp/Processor With Line Outputs on this page.
Use the LFE (purple) connector of the supplied combination LFE and trigger cable to
connect the subwoofer’s Line-Level LFE In connector to the dedicated subwoofer output
(or LFE output) of your audio/video receiver or preamp/processor. HKTS 210 SUB only:
Set the Input Mode switch in the “LFE” position.
Configure your receiver or preamp/processor’s setup menu for “Subwoofer On.” After
you have made and verified all connections, plug the subwoofer’s AC Power Cord into
an active AC outlet.
Connecting the Subwoofer to a Receiver or Preamp/Processor
With Line Outputs
L R
LINE-LEVEL
OUTPUTS
(HKTS 210 SUB only):
Set Input Mode
Switch to “Normal”
Stereo RCA Cable
(not supplied)
Use this installation method for receivers and preamp/processors that do not have a
dedicated subwoofer output but do have preamp-level (volume-controlled) line outputs.
If the receiver or preamp/processor has a dedicated subwoofer output with low-pass
filtering, see Connecting the Subwoofer to a Receiver or Preamp/Processor With a
Dedicated Subwoofer Output on this page.
Connect one end of a stereo RCA cable (not supplied) to the receiver’s or preamp’s line
outputs and the other end to the subwoofer’s Line-Level L/R In connectors. HKTS 210
SUB only: Set the Input Mode switch in the “Normal” position.
After you have made and verified all connections, plug the subwoofer’s AC Power Cord
into an active AC outlet.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon HKTS 200 SUB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon HKTS 200 SUB in the language / languages: English as an attachment in your email.

The manual is 0.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info