534550
11
Zoom out
Zoom in
Previous page
1/12
Next page
10
10 11
ENGLISH
TroubleshootingOperation
If there is no sound from any of the speakers:
Check that the receiver/amplifier is on and a source is playing.
Make sure that all wires and connections between the receiver/amplifier and the
speakers are connected properly.
Make sure none of the speaker wires is frayed, cut or punctured.
Review the proper operation of your receiver/amplifier.
If there is no sound coming from one speaker:
Check that the balance control on your receiver/amplifier is not set all the way to
one channel.
Check your receiver/amplifier’s speaker setup procedure to make sure that he
speaker in question has been enabled and its volume level has not been turned all
the way down.
Make sure that all wires and connections between the receiver/amplifier and the
speaker are connected properly.
Make sure the speaker wires are not frayed, cut or punctured.
If there is no sound coming from the center speaker:
Check your receiver/amplifier’s speaker setup procedure to make sure that the
center speaker has been enabled and its volume level has not been turned all the
way down.
Make sure that all wires and connections between the receiver/amplifier and the
center speaker are connected properly.
Make sure the speaker wires are not frayed, cut or punctured.
If your receiver is operating in Dolby® Pro Logic® mode, make sure that the center
speaker is not set to Phantom.
If there is no sound coming from the surround speakers:
Check your receiver/amplifier’s speaker setup procedure to make sure that the
surround speakers have been enabled and their volume levels have not been
turned all the way down.
Make sure that all wires and connections between the receiver/amplifier and the
surround speakers are connected properly.
Make sure the speaker wires are not frayed, cut or punctured.
Review proper operation of your receiver/processor and its surroundsound features.
Make sure the movie or TV show you’re watching has been recorded in a surround-
sound mode. If it is not, check to see if your receiver/amplifier has a different
surround-sound mode that you can use.
Review the operation of your DVD player and the DVD jacket to make sure the DVD
features the desired Dolby Digital or DTS® surround-sound mode, and that you
have properly selected that mode using both the DVD player’s menu and the discs
menu.
If there is no sound coming from the subwoofer:
Check that the subwoofer’s
Power Cord
8
is plugged into a working AC outlet.
Check that the subwoofer’s
Power Switch
7
is in the ON position.
Check that the
Subwoofer Level Control
is not turned all the way down (fully
counterclockwise).
Check the audio connection between your receiver/processor and the subwoofer.
Check your receiver/amplifier’s speaker setup procedure to make sure that the
subwoofer has been enabled and its volume level has not been turned all the way
down.
If the system plays at low volumes but shuts off as volume is increased:
Make sure that all wires and connections between the receiver/amplifier and the
speakers are connected properly.
Make sure none of the speaker wires is frayed, cut or punctured.
If youre using more than one pair of main speakers, check to be sure that you’re
not operating the system below the receiver/amplifier’s minimum impedance
requirements.
Turning the Subwoofer On and Off
Set the HKTS200SUB’s Power Switch
7
to the ON position.
If the
Power On Mode Switch
3
is set to AUTO, the HKTS200SUB will
automatically turn itself on when it receives an audio signal, and it will go into
standby mode when it has received no audio signal for 15 minutes. The HKTS200
SUB’s LED will illuminate white when the subwoofer is on, and will not be illuminated
when the subwoofer is in standby.
If the
Power On Mode Switch
3
is set to ON, the HKTS200SUB will remain on at all
times. The HKTS200 SUB’s LED will illuminate white.
If the
External Trigger Input Connector
4
is connected to a trigger voltage source,
the HKTS200SUB will turn on whenever a trigger voltage is present, and will turn off
after the trigger voltage ceases, regardless of the position of the Power On Mode
Switch
3
.
If you will be away from home for an extended period of time, or if you will not be
using the subwoofer for an extended period, switch the Power Switch
7
to the OFF
Position.
Subwoofer Adjustments: Volume
Use the Subwoofer Level Control
to set the HKTS200SUB’s volume. Turn the knob
clockwise to increase the subwoofers volume; turn the knob counterclockwise to decrease
the subwoofer’s volume.
Subwoofer Adjustments: Phase
The Phase Switch
2
determines whether the HKTS200SUB’s piston-like action moves
in and out in phase with the satellite speakers. If the subwoofer were to play out of
phase with the satellite speakers, the sound waves produced by the subwoofer could be
canceled out, reducing bass performance and sonic impact. This phenomenon depends in
part on the relative placement of all the speakers in the room.
Although in most cases the Phase Switch
2
should be left in the NORMAL position,
there is no absolute correct setting for the Phase Switch
2
. When the HKTS200SUB
is properly in phase with the satellite speakers, the sound will be clearer and have
maximum impact. This will make percussive sounds like drums, piano and plucked strings
sound more lifelike. The best way to set the Phase Switch
2
is to listen to music that you
are familiar with and set the switch in the position that gives drums and other percussive
sounds maximum impact.
Subwoofer Adjustments: Bass Boost
When set to the ON position, the Bass Boost Switch
1
enhances low-frequency
performance, resulting in bass with more impact, which you may prefer while watching
movies or listening to music. There is no harm in experimenting with this control –
setting the switch to the OFF position will return normal low-frequency performance.
0165CSK - HK HKTS20 and HKTS30 v6.indd 11 08/10/09 13:32:09
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon HKTS 20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon HKTS 20 in the language / languages: English as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon HKTS 20

Harman Kardon HKTS 20 User Manual - German - 12 pages

Harman Kardon HKTS 20 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info