HK 3700/3770
Setting up the Network
14
Listening through Headphones
Plug the 1/4” plug on a pair of headphones into the headphone jack on the front of the
receiver for private listening.
Selecting a Source
Select a source device connected to the HK 3700/3770 for playback by pressing its
associated button on the front panel or remote control.
The following sources are available in the HK 3700/3770 receiver:
• Cable/ Sat
• TV
• CD
• Phono in
• FM Radio
• AM Radio
• USB
• iPod
• Bluetooth Music (HK 3770 only)
• vTuner (Internet Radio)
• DLNA (Network)
Operating through Bluetooth (HK 3770 Only)
To wirelesly stream audio to the HK 3770 from a Bluetooth-enabled device using the
front panel control or the remote control:
1. Press the Bluetooth button.
2. Press the Menu button.
3. Select the Option menu using the Up and Down
navigation buttons and press OK.
4. Press OK when the Force pairing message appears.
5. Use the Bluetooth pairing menu from the device you
want to connect to the HK3770. The system will appear as
HK3770_BT in the list of Bluetooth available devices.
NOTE: If you want to connect a different or new device, restart the whole
process at step one.
NOTE: The Bluetooth commands Play/Stop/Pause/Fast Foward/Fast Rewind/
Previous/Next are supported by the HK3770 with compatible Bluetooth
devices. These commands can be carried out using the Transport Control
buttons of the remote control. These commands depend on different phone
models.
NOTE: On certain phone models, the pause button is also used to resume
playing music after pause. The play button has no function.
Listening to FM and AM Radio
The HK 3700/3770’s built-in tuner may be selected in one of the following ways:
• Pressing the front-panel FM/AM button
• Pressing the FM/AM button on the remote (HK 3700 only)
Press the FM/AM button again to toggle betwen FM and AM frequency ranges.
Radio stations may be selected in any of the following ways:
1. If you know the frequency number, enter it directly by first pressing
the Direct button on the remote, and then using the numeric keys.
2. After you have programmed preset stations (see below), either
enter the preset number directly (1 through 30) using the
remote control, or use the left and right navigation pad or next
and previous buttons to scroll through the list of presets.
3. In Auto Tuning mode (use the front panel tuning mode button or
long press the OK button on the remote control to select between
AUTO and Manual), use the remote control up and down navigation
pad or the front panel tuning buttons to scan in the chosen
direction until a station with acceptable strength is detected.
4. In Manual Tuning mode (use the front panel tuning mode button
or long press the OK button on the remote control to select
between AUTO and Manual), each press on the remote control
up and down navigation pad or the front panel tuning buttons will
tune the next frequency increment in the selected direction.
5. Press the Preset Scan button on the remote to scan through the previously
programmed preset stations. The tuner will pause for five seconds
at each frequency before tuning to the next preset. Press the Preset
Scan button again to select the current station and stop scanning.
To store a station in one of the 30 presets:
1. Tune to the desired station.
2. Press the MEM button on the remote.
3. Use the Numeric Keys to enter the desired preset number.
In radio mode, the navigation pad of the remote control can also be used. The Up/Down
buttons will tune the radio stations.
Listening to Media on a USB Device
Your stereo receiver is compatible with MP3 and WMA media. No other types of media
are supported.
• MP3 compatibility: Mono or stereo, Constant Bit Rates (CBR) from 32 kbps
to 320kbps, Variable Bit Rates (VBR) from lowest to highest quality, with
sample rates from 8 kHz – 48 kHz.
• WMA compatibility: Ver. 9.0 standard audio, stereo CBR with
32 kHz – 48 kHz sampling rate and 40kbps – 192kbps bit rate, mono CBR
with 8 kHz – 16 kHz sampling rate and 5 kbps – 16 kbps bit rate, VBR Pass
Encoding and Quality Encoding 10 – 98, 44 kHz and 48 kHz sampling rate.
NOTE: WMA 9.0 lossless format is not supported.
IMPORTANT: HK3700/3770 stereo receivers are not compatible with NTFS
formatted drives.
