599843
13
Zoom out
Zoom in
Previous page
1/17
Next page
ENGLISH
PROGRAMMED PLAY OPERATION
13
Programmed Play Operation
The HD3700’s advanced programming capability
enables you to select certain tracks, to preset
the order in which these tracks play, and to clear
specific programmed tracks after the program
was made.
Programmed Play
Programmed play allows you to program up to
99 tracks into the HD3700’s memory. To begin
programming the CD player, make sure that the
unit is in Stop mode, then press the Program
button
18
. PROG-01:001 will appear in the
Information Display, replacing the track time.
This indicates that you are about to program the
first track.
You may now begin to enter the tracks in the
order in which you wish to have them play. To
select a track on the disc, press the Numeric
buttons
4
corresponding to the desired track.
Be certain to enter the second and/or third
number of two- or three-digit numbers within
two seconds after the first number was entered.
You may also use the Search buttons
12
to select a track. When the track is selected,
press the Program button
18
. Note that the
indication on the Information Display will
change to PROG-02:001.
You may now select another track for the next
program step, following the instruction shown
above. When the track is selected, press the
Program button
18
again. Repeat this
procedure for each program step until you have
completed the desired programming. Press the
Stop button
16
once to complete a program
sequence, or press Play
13
to begin immediate
play of a program sequence.
Once a program list has been entered, press
the Play button
13
to begin listening to the
sequence. After the entire program has been
played, the CD player will stop. As long as the
Stop button
16
has not been pressed twice
you may repeat the programmed-play sequence
again by pressing the Play button
13
.
Editing a Program
A program can be edited even after it was
completed by pressing the Stop button
16
once. Each time you press the Program button
18
the track number and program step number
will be displayed in the programmed order, but
with steady track numbers, not blinking as in
the programming mode. As soon as the track
number starts blinking (this will take 1 second),
the appropriate program step number shown at
the left side is not programmed yet; now you can
change the track number with the Skip buttons
5
or the Numeric buttons
4
as described
above and add it to the program list by pressing
the Program button
18
.
Pressing the Stop button
16
twice will return
to normal mode but the program will stay in
memory and can be recalled easily by pressing
the Program button. Pressing the Clear button
8
(see below) or opening the disc drawer by
pressing Open/Close
2
, will erase the program
information from the unit’s memory.
Checking Program Contents
To check the contents of a program while the unit
is stopped, first press Program to enter program
mode. Each time the Check button
7
is
pressed now, the Information Display will step
through each of the programmed tracks.
To cancel the check mode press the Stop
button once.
Clearing Programs
To clear a single track from the program list,
press the Check button
7
until the track to be
deleted from the program sequence appears in
the Information Display
1
. When the track
number appears, press Clear
8
once, the track
selected will be deleted and the track number will
be replaced by the next programmed one
When the unit is stopped you may clear the entire
contents of a program by pressing the Clear
button
8
.
Important Note: When you’ve pressed the
Program button
18
(once or several times)
and the track number on the right starts blinking,
the appropriate program step number
(e.g. PROG-02:008) shown at the left display side
is not programmed yet. Do not continue to press
the Program button otherwise the track selected
will also be memorized. If you´re in doubt press
Stop button
16
and start the procedure again
with Program
18
.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon HD 3700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon HD 3700 in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info