16 SYSTEM SETUP
System Setup
System Defaults
The final step of the installation is to establish
the system’s defaults. It is helpful to take a few
minutes to familiarize yourself with these
settings, as they may require change before the
first use and later from time to time.
General Functionality of the OSD Menu
The complete setup and control of the DVD 47
takes place in an advanced user-guided On
Screen Display (OSD) menu system. The OSD can
be activated by pressing the SETUP button on the
remote control. Pressing this button again de-
activates the OSD.
The main menu consists of a PLAYER INFORMA-
TION Menu and a SET-UP Menu. The PLAYER
INFORMATION Menu will show all information
and options available for the disc currently play-
ing. The SET-UP Menu will help you configure all
audio and video settings which are normally only
made once.
Each Main Menu contains Submenus. These sub-
menus are shown as icons on the left side of the
menu. They can be highlighted by a white square
around the icon by moving the cursor with the
ARROW buttons. Icons can be activated by
pressing ENTER as soon as an icon is high-
lighted. When ENTER has been pressed, the color
of the icon will change to dark blue and you will
see that the Actual Settings of this submenu will
appear on the right side of the menu.
Although each Menu has various Submenus and
Settings, navigating through menus, submenus
and settings goes the same way. All submenus,
settings and options can be accessed with the
help of the ARROW (
KLN M
) and ENTER
buttons on the remote control.
To change a setting, simply move the cursor to
the appropriate submenu and press Enter
6
,
then move the cursor to the setting you wish to
change. This setting will be highlighted in light
blue, and a brief explanation will appear in the
Instruction Line on the bottom of your screen.
Next, press the Enter Button
6
and a drop-
down menu will appear that contains the
available options for that setting. Press the
KL
Navigation Buttons
9
until the
desired option is highlighted, then press the
Enter Button
6
to select that option.
Then select another option in this submenu or
move the cursor to the left to escape from the
submenu.
A Main Menu Line
B Submenus
C Actual Settings
D Instruction Line
Most DVDs are created to allow setup menus to
be displayed while the disc is playing, superim-
posed over the video playback. However, some
discs are authored in a way that does not allow
this. If you see the icon displayed on the
screen after pressing the Setup Button
8
or
the Info Button
A
, press the Stop Button
I
and then press the Setup or Info Button
8A
again.
Set Up Menu
The first step in checking or changing the system
defaults is to access the Setup Menu. First, make
certain that the DVD 47 is properly connected to
a video display, and that power is connected. For
this process, however, you do not need to load
any discs into the unit.
During STOP, PAUSE or PLAY mode, if you press
SETUP on the remote, the Set Up Menu appears on
the screen and the front panel display will show
SETUP. In the same time the DVD 47 will turn
to Resume mode (when it was just in play) and
resume playback after the Setup Menu has been
closed again.
This Main Menu and all menus in the following
section may look different, listing the settings
with different languages, depending on the set-
tings made previously. With the factory default
setting all languages are set to ”English”, that´s
why with all menus the English version is shown
in the manual.
In the SET-UP Menu you will find submenus for
making or changing all settings and adjustments
for both Audio and Video handling of your
DVD 47.
Note: When the Setup menu is activated while
player is in play or pause mode automatically the
Resume mode will be activated and the front
display will read
SETUP. As soon as the menu
is closed the player will resume the playback.
