139371
13
Zoom out
Zoom in
Previous page
1/34
Next page
13
Optional audio connections
Caution for the optical/coaxial digital audio
outputs:
When connecting an amplifier (with an optical/coaxial digital input )
which does not contain the Dolby Digital (AC-3) or DTS decoder, be
sure to select “PCM” at “Dolby Digital” and “DTS” of the initial setting
“Digital Audio Output” (see also page 27).
Otherwise any attempt to play DVDs may cause such a high level of
noise that it may be harmful to your ears and damage your speakers.
• CD´s can be played as they would normally be played.
Notes:
• Some DTS decoders which do not support DVD-DTS interface may not
work properly with the DVD/CD player.
When you use optical digital audio cable, please remove dust protec-
tion cap from Optical Jack on the rear panel.
Manufactured under license from Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of Dolby Laboratories. Confidential
Unpublished Works.1992-1997 Dolby Laboratories, Inc. All rights
reserved.
Dolby Digital and DTS
Both Dolby Digital and DTS are audio formats used to record 5.1-channel
audio signals onto the digital track of film. Both of these formats provide
six separate channels: left, right, center, left rear, right rear, and common
subwoofer.
Remember, that Dolby Digital or DTS will only play 5.1-channel sound if
you’ve connected a DTS or Dolby Digital receiver or decoder and if the
disc was recorded in the Dolby Digital or DTS format.
Dolby Digital is a trademark of Dolby Laboratories Licensing Corporation
DTS is a registered trademark of Digital Theater Systems.
Audio from the optical/coaxial digital audio out-
puts.
• Remove the dust protection cap from the optical digital audio output
and connect the cable firmly so that the configurations of both the
cable and the connector match.
• Keep the dust protection cap and always
reattach the cap when not using the connector.
Concerning the audio output from the unit’s
optical/coaxial digital audio output connector:
*
1
Digital Audio Output (see page 27) selected ”Dolby Digital” or
”PCM”.
*
2
For copyright protection sound with 96 kHz sampling is converted into
48 kHz sampling when it is output from the unit’s optical/coaxial digi-
tal audio outputs, but high quality sound with full bit resolution is
available on the analog AUDIO OUT connectors.
*
3
Digital Audio Output selected ”DTS” or other (see page 27).
For your reference:
Notes when connecting the optical digital audio cable (optional)
• Dolby Digital (AC-3) is a digital sound compression technique devel-
oped by the Dolby Laboratories Licensing Corporation.
Supporting 5.1-channel surround sound, as well as stereo (2-channel)
sound, this technique enables a large quantity of sound data to be effi-
ciently recorded on a disc.
• Linear PCM is a signal recording format used in CDs. While CDs are
recorded in 44.1 kHz/16 bit, DVDs are recorded in 48 kHz/16 bit up to
96 kHz /24 bit.
• If you have a Dolby Pro Logic Surround decoder connected to the
DVD10’s analog AUDIO OUT connectors, you will obtain the full benefit
of Pro Logic from the same DVD movies that provide full 5.1-channel
Dolby Digital soundtracks, as well as from titles with the Dolby
Surround mark.
Disc:
DVD
CD
Sound recording
format:
Dolby Digital
(AC-3)
Linear PCM
(48/96Khz
16/20/24bit)
DTS
Linear PCM
Optical/Coaxial digital audio
output
Dolby Digital bitstream (2-5.1ch)
or PCM(2ch, 48 Khz/16bit) *
1
Linear PCM (2ch) (48kHz sam-
pling/16 bit only) *
2
Bitstream or no output *
3
Linear PCM (44.1 kHz sampling)
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon dvd 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon dvd 10 in the language / languages: English as an attachment in your email.

The manual is 14,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info