456609
7
Zoom out
Zoom in
Previous page
1/44
Next page
FRONT PANEL INFORMATION DISPLAY 7
FRONT PANEL INFORMATION DISPLAY
A
D
B
F
C
E
A Bitstream Indicators
B Lower Display Line
C Multiroom Indicator
D OSD Indicator
E Speaker/Channel Input Indicators
F Upper Display Line
A Bitstream Indicators: When a digital input is playing,
one of these indicators will light to display the type of data
signal in use.
B Lower Display Line: Depending on the receiver’s
status, a variety of messages will appear here. In normal
operation, the current surround mode name will appear
on this line.
C Multiroom Indicator: This indicator lights when
the multiroom system is active. Note that it will remain
lit when the multiroom system is in use even when the
main room system is in the Standby mode and all
other indicators are dark. (See page 31 for more
information on the Multiroom system.)
D OSD Indicator: When the OSD system is in use,
this indicator lights to remind you that the other indica-
tors in this display do not function when the On-Screen
Display is being used.
E Speaker/Channel Input Indicators: These indica-
tors are multipurpose, indicating either the speaker type
selected for each channel or the number of channels
available from the input source. The left, center, right,
surround and surround back speaker indicators are
composed of overlapping ovals, while the subwoofer is
represented by a single box labeled “LFE”. The center
oval lights when a “Small” speaker is selected, and the
outer oval lights when “Large” speakers are selected.
When none of the indicators are lit for a specific chan-
nel, no speaker has been selected at that position. (See
page 19 for more information on configuring speakers.)
The indicators are positioned to correspond to the input
channels. For standard analog inputs, only the top left
and right indicators will light, indicating a stereo input.
When a digital source is playing, the indicators will light
to display the channels being received at the digital
input. When the indicators flash, the digital input has
been interrupted.
F Upper Display Line: Depending on the receiver’s
status, a variety of messages will appear here. In normal
operation, the current input source information will
appear on this line, including the input name and an
indication as to analog audio or one of the optical or
coax digital audio inputs.
NOTE: To make it easier to follow the installation instructions that refer to this illustration, a larger copy may be
downloaded from the Product Support section at www.harmankardon.com.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon DPR 1001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon DPR 1001 in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info