Manual Harman Kardon CineParis 7 (AVR155 + DVD29) (page 39 of 52) (English)

502795

Zoom out

Zoom in

1/52

SYSTEM SETUP 39

ENGLISH

System Setup

The AVR 155 is equipped with a number of ad -

vanced features that add extra flexibility to the

unit’s operation. While it is not necessary to use

these features to operate the unit, they provide

additional options that you may wish to use.

Front-Panel-Display Fade

In normal operation, the front-panel displays and

indicators remain on at full brightness, although

you may also dim them or turn them off as

shown on page 38. As an additional option, you

may also set the AVR so that the displays are on

whenever a button is pressed on the front panel

or remote, but then fade out after a set period of

time.

To set the front-panel displays to the Fade mode,

press the OSD Button

to bring the

Master Menu to the screen. Press the

⁄

Navigation Button

so that the ﬁ cursor

is pointed to the

SYSTEM SETUP line, and

press the OK Button

to enter the

SYSTEM SETUP menu (Figure 12).

Figure 12

With the SYSTEM SETUP menu on your

video display, press the

⁄

Navigation

Button

so that the ﬁ cursor is pointed to

the

VFD FADE TIME OUT line. Next, press

the

‹

›

Navigation Button

so that

the amount of time that you wish the displays to

fade out after a button is pressed is shown.

Once this time is set and the unit returned to

normal operation, the displays will remain on for

the time period selected whenever a button is

pressed on the front panel or remote. After that

time they will gradually fade out, with the excep-

tion of the lighting surrounding the Standby/On

Switch

, which remains on to remind you

that the AVR is turned on. Note that if the dis-

plays have been turned completely off using the

Dim Button, as shown on page 38, the Fade

function will not operate.

If you wish to make adjustments to other items

on the

SYSTEM SETUP menu, press the

⁄

Navigation Button

to place the

ﬁ cursor next to the desired item, or place the

ﬁ cursor next to the

BACK TO MASTER

MENU line and press the OK Button

make an adjustment to another menu. If you

have completed all adjustments, press the OSD

Button

to exit the menu system.

Turn On Volume Level

As is the case with most audio/video receivers,

when the AVR is turned on, it will always return

to the volume setting in effect when the unit was

turned off. However, you may prefer to always

have the AVR turn on at a specific setting,

regardless of what was last in use when the unit

was turned off. To change the default condition

so that the same volume level is always used at

turn-on, you will need to make an adjustment in

the

SYSTEM SETUP menu. To start the

adjustment, press the OSD button

to bring

the

MASTER MENU (Figure 1) to the screen.

Press the

⁄

button

, until the on-screen ﬁ

cursor is next to the

SYSTEM SETUP line.

Press the OK button

to enter the SYSTEM

SETUP

menu (Figure 12).

At the

SYSTEM SETUP menu make certain

that the on-screen ﬁ cursor is next to the

VOLUME DEFAULT line by pressing the

⁄

buttons

as needed. Next, press the

›

button

so that the word ON is shown in the

video display. Next, press the

button

once

so that the on-screen

›

cursor is next to the

DEFAULT VOL SET line. To set the desired

turn-on volume, press the

‹

›

buttons

or hold them pressed until the desired volume

level is shown on the

DEFAULT VOL SET

line. Note that this setting may NOT be made

with the regular volume controls.

NOTE: Since the setting for the turn-on volume

cannot be heard while the setting is being made,

you may wish to determine the setting before

making the adjustment. To do this, listen to any

source and adjust the volume to the desired level

using the regular volume controls

. When the

desired volume level to be used at turn-on is

reached, make a note of the setting as it appears

in the lower third of the video screen or in the

Main Information Display

A typical volume level will appear as a negative

number such as -25dB. When making the

adjustment, use the

‹

›

buttons

enter this setting.

Unlike some of the other adjustments in this

menu, the turn-on volume default will remain in

effect even when the unit is turned off

completely, unless it is changed or turned off in

this menu.

If you wish to make other adjustments in the

menu, press the

⁄

Buttons

until the on-

screen ﬁ cursor is next to the desired setting or

the

BACK TO MASTER MENU line and press

the OK button

. If you have no other adjust-

ments to make, press the OSD Button

exit the menu system.

Semi-OSD Settings

The semi-OSD system places one line messages

at the lower third of the video display screen

whenever the Volume, Input Source, Surround

mode or tuner frequency of any of the configura-

tion settings are changed. The semi-OSD system

is helpful in that enables you to have feedback

on any control changes or remote commands

using the video display when it is difficult to view

the front-panel displays. However, you may

occasionally prefer to turn these displays off for a

particular listening session. You may also want to

adjust the length of time the displays remain on

the screen. Both of those options are possible

with the AVR.

To turn off the semi-OSD system, you will need to

make an adjustment in the

SYSTEM SETUP

menu (Figure 12). To start the adjustment, press

the OSD button

to bring the MASTER

MENU to the screen. Press the

⁄

Button

until the on-screen ﬁ cursor is next to the

SYSTEM SETUP line. Press the OK Button

to enter the SYSTEM SETUP menu.

At the

SYSTEM SETUP menu make certain

that the on-screen ﬁ cursor is next to the

SEMI OSD line by pressing the

⁄

buttons

as needed. Next, press the

›

button

that the word

OFF is shown in the video

display.

Note that this setting is temporary and will

remain active only until it is changed or until the

AVR is turned off. Once the unit is turned off, the

semi-OSD displays will remain activated, even if

they were switched off for the previous listening

session.

To change the length of time that the semi-OSD

displays remain on the screen, go to the

SYSTEM SETUP Menu as outlined earlier,

and press the

⁄

buttons

as needed, until

the on-screen ﬁ cursor is next to the

SEMI-OSD TIME OUT line. Next, press the

‹

›

Buttons

until the desired time in

seconds is displayed. Note that unlike most of

the other options in this menu, this is a perma-

nent setting change, and the time-out entry will

remain in effect until it is changed, even when

the unit is turned off.

If you wish to make other adjustments in the

menu, press the

⁄

Buttons

until the on-

screen ﬁ cursor is next to the desired setting or

the

BACK TO MASTER MENU line and press

the OK button

. If you have no other adjust-

ments to make, press the OSD Button

exit the menu system.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon CineParis 7 (AVR155 + DVD29) in the language / languages: English as an attachment in your email.

The manual is 1,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon CineParis 7 (AVR155 + DVD29)

Harman Kardon CineParis 7 (AVR155 + DVD29) User Manual - English, Dutch - 28 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Harman Kardon CineParis 7 (AVR155 + DVD29) Manual

Product: