Manual Harman Kardon CDR 30 (page 17 of 26) (English)

502658

Zoom out

Zoom in

1/26

PLAYBACK BASICS 17

Playback Basics

During normal playback of MP3 discs, pressing

the CDP or CDR Display Button

ˆ˘

will show the following information, in

order:

Elapsed time of current track ➜ Remaining Time

of current track ➜ Current Track Number ➜ File

name of Current Track (Up to the first six digits)

To read the total time of all tracks recorded on

an MP3 disc, the disc must be stopped.

Then, press the CDP or CDR Display Button

ˆ˘

(as appropriate) for three sec-

onds, until a TTL TIMEON message appears

in the Time/Message Display

. Then press

the CDP or CDR Display Button again to alter-

nate between a display of the total number of

tracks and the total time of the disc. Press

and hold the CDP or CDR Display Button again for

three seconds until a TTLTIMEOFFmessage

appears in the Time/ Message Display

return to standard display.

While MP3 playback is possible from both the

CDP and CDR decks, only one MP3 disc may be

played at a time. If you load two MP3 discs at

the same time, both MP3 Indicators

will be

lit. Press the Play Button

for

the deck you wish to play.

If you try to play an MP3 disc in one of the decks

when the other is already playing an MP3 disc, an

MP3 BUSY message will appear in the

Time/Message Display

where the second

disc has been inserted.

Also when a standard Audio CD is placed in one

deck and an MP3 disc in the other and you want

to play both, first start the MP3 disc and then the

standard disc, otherwise the display will also

show the message MP3 BUSY.

Notes About MP3 Playback:

• When an MP3 disc is played, only the Analog

Audio Outputs

¡™

are available. There is

no signal at the Digital Audio Outputs

¢∞•ª

during MP3 playback. To ensure

that the MP3 output is heard, make certain

that the correct analog input is selected on

your receiver, processor or preamp.

• The forward and reverse “fast play” or Search

Controls fy do not operate during

MP3 playback. However, the standard Play

, Pause

ÔZ

and Stop

Ób

Controls operate as they do for

normal play. The Next Track wÛ˝

and Previous Track

ÙX

Controls also

work normally during MP3 playback.

• The CDR 30 will play only standard MP3 discs

recorded in the MPEG 1/Layer 3 format. Other

compressed digital audio formats will not be

played back, and any non-MP3 tracks will be

skipped.

• When an MP3 disc is dubbed in the CDR 30,

the copy disc will be recorded in the standard

“Red Book” CD Audio format. It is not possible

to make an MP3 copy of an MP3 disc. More-

over MP3 dub is possible at normal speed only.

HDCD Playback

HDCD, which stands for High Definition Com-

patible Digital, is a special recording process that

enables the CDR 30 to deliver the ultimate in CD

audio playback. The CDR 30’s circuitry takes

advantage of the special HDCD recording process

when HDCD-encoded discs are used, and it is

also completely compatible with non-HDCD

discs, which benefit from the unit’s advanced dig-

ital-to-analog converters.

No special adjustment is needed to play HDCD

encoded discs. Simply use the disc as you would

any other CD.Although these discs also play on

conventional CD players, when played on the

CDR 30 the special HDCD decoding circuitry is

automatically activated, delivering extraordinary

fidelity and the highest possible overall quality.

The CDR 30 will playback and internally decode

HDCD discs from either the CDP or CDR decks

and the appropriate HDCD Indicator

will

light above the deck in use. However when

HDCD discs are played on both decks simul-

tanously (in Dual mode), the internal decoder

works only with the first disc selected and the

appropriate HDCD Indicator

will light.

Nevertheless, when the HDCD decoding is done

in an external receiver or processor using a digi-

tal output connection from the CDR 30, the digi-

tal signal from any deck can be HDCD decoded,

no matter if the appropriate HDCD Indicator

lights in the CDR30´s display or not.

CD Text Playback

An increasing number of CD discs are recorded

with CD Text information that may display the

disc’s title, the name of the artists, the title of

specific individual tracks, and the artist for specif-

ic individual tracks, depending on how the disc’s

producers program the information.

When a disc’s Table of Contents (TOC) has been

read, but the disc is stopped, press the CD Text

Button

for the deck in use (either the left

side, Play/CDP deck or the right side, Record/

CDR deck) to view the title of the disc followed

by the name of the artist.

When a disc with CD Text information is playing,

press the CD Text Button

for the deck in

use (either the left side, Play/CDP deck or the right

side, Record/CDR deck) to view the name of the

track that is playing and the artist for that track.

Notes on CD Text Display:

• If the CD Text buttons are pressed when the

disc playing does not contain CD Text informa-

tion, a NO TEXT message will flash three

times in the Time/Message Display

• Only capital letters will be displayed, and lower

case letters will be capitalized.

• Blank spaces may occasionally appear in place

of invalid text characters.

You may quickly scan through the contents of a

disc while listening to the playback at high speed

in forward or reverse. To move forward through a

disc, press the Forward Search button

the remote or press and hold the Next button

ÛW

on the front panel that is appropriate for

the deck in use.To move backwards through a

disc, press the Reverse Search button f on

the remote, or press and hold the Previous but-

ton

ÙX

on the front panel that is appropriate

for the deck in use.When using the remote,

always remember to make certain that you have

selected the deck you wish to control by pressing

the appropriate selector button

before

entering the desired remote command.

Track Skip

To move from one track on a disc directly to

another, enter the number for the desired track

with the Numeric Keys

. The disc will pause

briefly to locate the track, and then immediately

play it. When entering a two-digit track number,

the second digit must be entered within three

seconds of the first digit.

To move to the next track on a disc, press the

Next button

on the remote, or briefly press

the appropriate front panel Next button

ÛW

for the deck in use.Additional presses of the but-

ton will move forward through the tracks on the

disc.

When a disc is playing, press the Previous but-

ton

ÙX

briefly to return to the beginning

of the track being played.Additional presses of

the Previous button will move backwards

through the tracks on the disc.

When a disc is stopped, you may press the Next

or Previous buttons repeatedly to locate a

specific track that you wish to play. When the

desired track number appears at the left side of

the appropriate Time/Message Display

press the Play button

to hear that

track.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon CDR 30 in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Harman Kardon CDR 30 Manual

Product: