546080
10
Zoom out
Zoom in
Previous page
1/21
Next page
Connecting the Player
HDMI Connection
If Your Receiver/Processor Has an HDMI Connection
Use the supplied HDMI cable to connect the player’s HDMI Output connector to your
receiver/processor’s HDMI input. Use another HDMI cable to connect your receiver/
processor’s HDMI output to your TV’s HDMI input.
If Your Receiver/Processor Does Not Have an HDMI Connection
Use the supplied HDMI cable to connect the player’s HDMI Output connector directly to
your TV’s HDMI input.
Coaxial Digital Audio Output Connection
If you did not connect the BDT 3/BDT 30’s HDMI Output connector to your receiver/
processor, connect the player’s Coaxial Digital Output connector to your receiver/
processor’s coaxial digital input.
Analog Audio Output Connections
Connect the BDT 3/BDT 30’s Analog Audio Output connectors to your receiver/proces-
sor’s analog audio inputs or to your analog recorder’s analog audio inputs.
Composite Video Output Connection
If you did not connect the BDT 3/BDT 30’s HDMI Output connector to your TV or your
audio/video receiver, connect the player’s Composite Video Output connector to your
TV’s or audio/video receiver’s composite video input.
Network Connection
Use a Cat. 5/RJ45 network cable (not supplied) to connect the BDT 3/BDT 30’s Net-
work connector directly to a network router, a network switch, a network modem or an
Ethernet network wall jack that has Internet access. NOTE: The BDT 3/BDT 30 cannot
access content on other networked devices. The network connection enables the BDT 3/
BDT 30’s BD-Live features. See BD-Live Interactivity, on page 15, for more information.
Power Cord Connector
The BDT 3/BDT 30 comes with a detachable AC power cord. This type of cord makes it
easier for you to install and connect all other system wiring to the player’s rear panel.
NOTES:
The power requirement for the BDT 3/BDT 30 is 110 – 240V AC, 50/60Hz, 25W.
Connecting to a power source other than the one listed may damage the player or
cause abnormal operation.
Before connecting the AC power cord to a wall outlet, confirm that all of the other
connections have been made correctly.
Connect the female end of the BDT 3/BDT 30’s detachable power cord to the
player’s Power Cord connector. Plug the other end into a working, unswitched
AC outlet.
Set the BDT 3/BDT 30’s Main Power switch in the “On” position. The player’s Power
indicator will turn amber, indicating that the player is in the Standby mode.
Preparing the Remote Control
Installing the Batteries
Your BDT 3/BDT 30 remote control uses two AAA batteries (supplied). Insert the batteries
as shown in the illustration, making sure to observe the correct polarity.
+
+
Using the Remote Control
When using the remote, remember to aim it toward the player’s front panel. Make sure
that no objects, such as furniture, block the remote’s view of the player. Bright lights,
fluorescent lights and plasma video displays may interfere with the function of the
remote.
The remote has a range of about 20 feet (6.1m), depending on the lighting
conditions.
You can use the remote at an angle of up to 30° from either side of the player.
If the remote does not seem to be operating properly, make sure that the batteries are
inserted correctly. If the remote still does not operate properly, replace both batteries
with new ones.
10
BDT 3/BDT 30
Connecting the Player/Preparing the Remote Control
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon BDT 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon BDT 3 in the language / languages: English as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon BDT 3

Harman Kardon BDT 3 User Manual - Dutch - 21 pages

Harman Kardon BDT 3 User Manual - French - 21 pages

Harman Kardon BDT 3 User Manual - Italian - 21 pages

Harman Kardon BDT 3 User Manual - Swedish - 21 pages

Harman Kardon BDT 3 User Manual - Spanish - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info