613820
19
Zoom out
Zoom in
Previous page
1/37
Next page
19
BDS
Programming Remote Control “Punch-Through” Commands
After programming the remote to control an auxiliary (Aux) component, you can also
program it so it will control the Aux component’s channel up/down and transport
functions (Play, Pause, etc.) even when the remote is not in the Aux-control mode. For
example, if the remote is programmed to operate your TV in the Aux control mode, you
can also have the TV’s channel +/– functions “punch through” and operate even when
the remote is in the Disc, Radio or iPod control modes.
1. Press and hold the button for the main device the remote will be operating. The
button will light up, go dark and then light up again. Release the button.
2. Select the type of punch-through programming.
a) For “punch-through” channel control, press the Channel Up button.
b) For “punch-through” transport control, press the Play button.
3. Press the Aux button. The original source button will flash to confirm.
You can repeat Step 1 – Step 3 for any of the remote’s source-selector buttons (Aux,
Radio etc.). NOTE: “Punch-through” channel and transport commands will override the
existing commands for those buttons in the source modes you program.
To undo “punch-through” programming, follow the same steps as above, but press the
same source selector button in Step 1 and Step 3.
Using the Remote After it is Programmed
Pressing the remote’s Aux source-selector button will put the remote into the auxiliary-
control mode, and it will control the auxiliary component(s) via the codes you have
programmed into it.
To switch the remote back to the BDS receiver-control mode from the auxiliary-control
mode, press any one of these buttons: Disc, Radio, iPod or Home.
Setting Up the Receiver
NOTE: The menu screens shown in this manual are for illustrative purposes and may
differ somewhat from the actual displays.
To set up your BDS system, you will use the remote to navigate through all of the on-
screen menus and to make selections from them.
Use the Cursor Up/Down buttons to navigate through the menu list. When an item is s
highlighted, a white border will appear around it.
To select a highlighted item, press the OK button. The screen will change depending s
on your selection.
To return to the previous screen, press the Exit button. s
Setup Wizard
When you turn your BDS receiver on for the first time, the on-screen menu will display
the Setup Wizard.
Setup Wizard Page: 1/5
Next
Welcome to the Harman Kardon BDS Setup
Wizard.
Some simple information is needed to ensure
you get the best experience from your product.
You can adjust these settings later in addition
top making changes to more advanced settings
by pressing the ‘Settings’ button on the
remote.
OK
Before you can use your BDS system, you need to set the language and make a few
basic settings so that the BDS receiver’s video output will work properly with your TV.
Press the OK button and the Wizard’s language screen will appear.
Setup Wizard
Page: 2/5
Next
Please select which language you
would like the BDS menus to appear.
OK
Previous
English
Español
Français
Deutsch
Italiano
After setting the language you want the on-screen menus to appear in, press the OK
button and the Wizard’s TV-resolution screen will appear.
Setup Wizard
Page: 3/5
Next
Please select the highest resolution that your
TV supports. If you are unsure, select ‘Auto’.
Upon making a selection the screen will be
changed to the chosen resolution. You will be
presented with the option to continue with the
new resolution or ‘Cancel’ to return to the
previous resolution. If the screen remains
blank, please wait 15 seconds without
pressing anything and the system will
automatically return to the previous resolution.
OK
Previous
Auto
480p/576p
720p
1080i
1080p
After selecting your TV’s highest resolution, press the OK button, and the Wizard’s aspect-
ratio screen will appear. Note: If you are unsure of your display’s highest resolution,
select “Auto” and BDS will select the optimal resolution for you.
Setup Wizard
Page: 4/5
Next
Please select the best aspect ratio
that fits your TV.
OK
Previous
16:9 Full
16:9 Normal
4:3 Pan & Scan
4:3 Letterbox
After selecting the aspect ratio that best fits your TV, press the OK button to save your
setting, then press it again to exit the Setup Wizard.
Preparing the Remote Control and
Setting Up the Receiver
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon BDS485 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon BDS485 in the language / languages: English as an attachment in your email.

The manual is 7,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon BDS485

Harman Kardon BDS485 User Manual - German - 10 pages

Harman Kardon BDS485 User Manual - Dutch - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info