537904
18
Zoom out
Zoom in
Previous page
1/38
Next page
18
BDS Setting Up the Receiver
Video Processing: This option allows you to set the BDS receiver’s internal video
processing.
Video Mode: This setting lets you select a preset video-processing option to optimize
the picture for the current program by adjusting the brightness, contrast, color and
sharpness:
Standard: Neutral control settings.
Vivid: For video games.
Cinema: For movies and many television broadcasts.
Custom: This option lets you adjust the picture settings manually. The Brightness,
Saturation (color saturation), Hue, Contrast, Sharpness and CTI settings appear
as sliders. The default setting for each adjustment is 0. Use the Cursor Left/Right
buttons to change each setting’s value.
Audio Settings
Adjust bass and treble controls
Tone Controls
Audio Output
Speaker Settings
Bass
Treble
0dB
0dB
Audio Settings
Tone Controls: This option lets you increase or decrease the amount of bass (low
frequencies) and treble (high frequencies) in the sound. The adjustment ranges from
–10dB to +10dB, in 1dB increments.
Audio Output: This option lets you set the following items:
HDMI Audio Out: In addition to digital video signals, the BDS receiver’s HDMI connection
also carries digital audio signals.
PCM: This option outputs a two-channel downmix derived from the program’s native
audio format via the HDMI output.
Off: This option turns off the receiver’s HDMI audio output. We recommend setting
this option to “Off, so you can take full advantage of the superior audio capability
of your BDS receiver.
Dynamic Range Control: This setting makes the loud and quiet parts of a movie or music
sound closer to the same volume (a process known as compression). Compression lets
you turn up the volume so you can hear the quiet parts without the loud parts disturbing
other people. NOTE: This feature works only with Dolby Digital programs that have been
specially encoded. Three settings are available:
Off: Never applies compression. Use this setting when the volume may be as loud
as you desire.
On: Always applies compression. Use this setting when you want the volume to be as
quiet as possible without making it difficult to hear spoken dialogue.
Auto: Applies compression based on information encoded within the Dolby Digital
bitstream. The receiver will selectively apply compression only during the most
dynamic parts of the soundtrack.
Component Audio Input: This setting lets you associate one of the BDS receiver’s audio
input connections (Coaxial In, Optical In 1, Optical In 2, Aux In 1, Aux In 2) with the
Component Video Input. The audio connection you designate here will be active whenever
the Component input is selected.
Speaker Settings: This option allows you to set up the receiver to work properly with
your loudspeakers. There are three settings:
EzSet/EQ: This option makes the supplied EzSet/EQ microphone automatically detect the
capabilities of each connected loudspeaker, and optimize the BDS receiver’s performance
for your speakers. This will provide excellent results in most installations.
Manual Configuration: This option lets you manually configure the BDS receiver to work
with your speakers. Select this option if you wish to set up the receiver for your speakers
manually or if you are unable to run EzSet/EQ calibration.
With both options, the first step is to select the configuration of your speaker system:
2.0: This configuration consists of left and right main speakers but no subwoofer.
Selecting this configuration sends all of the bass to the left and right speakers, so be
sure that they are full-range and can handle deep bass.
2.1: This configuration consists of left and right main speakers, plus a subwoofer.
3.1: This configuration consists of front left, center and front right speakers, plus a
subwoofer. (This option is only available on BDS 575 and BDS 577 receivers.)
5.1: This configuration consists of front left, front right, center, surround left and
surround right speakers, plus a subwoofer. (This option is only available on BDS 575
and BDS 577 receivers.)
Speaker Package: This setting enables processing in the BDS receiver that will maximize
your system’s audio performance. If you are using one of the listed Harman Kardon
speaker packages with your BDS receiver, select its model number from the list. If you’re
not using one of the listed Harman Kardon speaker packages, select “Other.”
EZ Set/EQ:
The BDS receiver’s EZSet/EQ™ system uses the supplied EzSet/EQ microphone to
perform this important step automatically. Before beginning, be sure you have correctly
connected your speakers to the BDS receiver.
1. Plug the supplied EzSet/EQ microphone into the BDS receiver’s Headphone
connector.
Headphone
Connector
EzSet/EQ Microphone
(supplied)
2. Place the microphone at ear height in your main listening position.
3. Select Continue in the EzSet/EQ (Automatic Setup) box that appears.
Audio Settings
Off
2.0
2.1
3.1
5.1
The EzSet/EQ automatic setup can calibrate the BDS system and configure the
loudspeaker parameters automatically to get the best sound performance.
EzSet/EQ (Automatic Setup)
Continue Cancel
Please plug the EzSet/EQ microphone into the front
panel of the BDS. Place the mic at ear level at your
desired listening position. If a Subwoofer is
connected, set the volume level (on the subwoofer)
to half.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon BDS 775 - SET at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon BDS 775 - SET in the language / languages: English as an attachment in your email.

The manual is 6,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon BDS 775 - SET

Harman Kardon BDS 775 - SET User Manual - German - 38 pages

Harman Kardon BDS 775 - SET User Manual - Dutch - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info