642273
15
Zoom out
Zoom in
Previous page
1/33
Next page
Setting up the System
15
BDS 280S/580S
Erasing a Learned Code and Restoring the Original Button Code
1. Press and simultaneously hold down the Aux and Bookmark (green)
buttons on the BDS remote control for at least three seconds. The BDS
remote will enter the learning mode after the Aux button LED turns on.
2. Press and release the remote control button that you want
to erase. The aux button’s LED will flash three times.
3. To erase other buttons, press the selected buttons.
4. To exit the erase mode, press aux button.
Resetting the Remote to Factory Default Condition
1. Press and simultaneously hold down the Aux and Thumbnail (yellow)
buttons on the BDS remote control for at least three seconds.
2. The Aux LED will flash three times and exit learn-erase mode.
NOTE:
By erasing all learned codes, all of the BDS remote buttons will
return to their original functions.
To program the remote control for TV device, please use the TV
button instead of AUX button.
Controlling an Apple TV
If you have connected an apple TV to the BDS system’s HDMI 3 input, you can also use
the BDS remote to control an apple TV that is streaming audio and video files stored on
your home network, or accessing media from an Internet service such as Netflix.
Select any other input source to return the BDS remote to its normal operation.
NOTE: To program the remote control for TV device, please use the TV button
instead of AUX button.
Using the Remote after it is Programmed
Pressing the remote’s Aux Input button will put the remote into the auxiliary-
control mode, and it will control the auxiliary component(s) via the codes you have
programmed into it.
If you have programed a TV with TV button, you can press remoter’s TV button to put
the remote into TV control mode and it will control the TV via
the codes you have
programmed into it.
To switch the remote back to the BDS system-control mode from the auxiliary-control
mode, press any of the other Input buttons or the Home button.
Setting up the System
To set up your BDS system, you will use the remote to navigate through all of the
onscreen menus and to make selections from them.
Use the Cursor Up/Down buttons to navigate through the menu list.
To select a highlighted item, press the OK button. The screen will change
depending on your selection.
To return to the previous screen, press the back button
.
NOTE: BDSx80 CR3 software will have advanced intial setup, which means
the setup procedure will be different with current one at that time.
1. When you turn on your BDS system for the first time, the on-
screen menu will show the Initial Setup screens. The first
screen allows you to select the language you want to use.
2. Press OK, and the initial setup Resolution screen will be displayed.
3. Highlight your choice and press OK. Next, the initial setup Aspect Ratio
screen will appear. 16:9 Full is the best choice for most displays.
4. Highlight your choice and press the OK button. Setup is complete. Press
OK once more to finish Initial Setup and show the home menu.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon BDS 685S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon BDS 685S in the language / languages: English as an attachment in your email.

The manual is 24,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon BDS 685S

Harman Kardon BDS 685S User Manual - German - 33 pages

Harman Kardon BDS 685S User Manual - Dutch - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info