Manual Harman Kardon BDS 680 - SET (page 7 of 33) (English)

537902

Zoom out

Zoom in

1/33

BDS 280/580 Rear Panel Controls and Connections

BDS 280/580

The following are the controls available in the rear panel of the BDS 280/580 sytem:

1. Main Power Switch

2. AirPlay Antenna

3. Speaker outputs

4. Optical Digital Audio (S/PDIF) inputs

5. Trigger Output

6. AUX 1 input and AUX 2 input

7. Subwoofer output

8. Wi-Fi Antenna

9. FM radio antenna output

10. Coaxial digital audio (S/PDIF) input

11. IR Remote input

12. HDMI output (ARC)

13. HDMI 1/MHL input

14. HDMI 2 input

15. HDMI 3 (Apple) input

16. USB input

17. Network Connector

18. WPS button

19. AC Power input

1. Main Power Switch: This mechanical switch turns the BDS system’s power supply

ON or OFF. After you have made and verified all connections, set this switch to the ON

position. During normal use, you will usually leave this switch set to ON; it cannot be

turned ON or OFF using the remote control. To conserve energy when you are not using

the system for an extended period of time, set this switch to OFF.

2. AirPlay Antenna: Connect the antenna accessory labeled Antenna 1 here for

improved Wi-Fi reception. Connect the antenna accessory for the AirPlay playback from

the iPad/iPod/iPhone.

3. Speaker Outputs: Use the speaker wires supplied with the speakers to connect the

speakers to the proper terminals.

• The BDS 280 system has two outputs for left and right speakers.

• The BDS 580 system has five outputs for center, front left, front right, sur-

round left and surround right speakers.

4. Optical Digital (S/PDIF) Inputs: Connect the optical digital output of an audio

source component here. The signal may be a Dolby Digital, DTS® or standard PCM digital

audio.

5. Trigger Output: This connector provides 12V DC whenever the system is ON. It can

be used to turn on and off other devices such as a powered subwoofer.

6. AUX 1 and AUX 2 Input: Use these connectors to connect to an audio source device

(such as a tape deck). Do not connect a turntable to these connectors without a phono

preamp.

7. Subwoofer Output: Use a mono RCA audio cable to connect this jack to a powered

subwoofer’s line-level input or LFE jack.

8. Wi-Fi Antenna: Connect the antenna accessory labeled Antenna 2 here for

improved Wi-Fi reception.

9. FM Radio Antenna Output: Connect the supplied FM antenna to this terminal.

10. Coaxial Digital Audio (S/PDIF) Input: Connect the coaxial digital output of an

audio source component here. The signal may be a Dolby Digital bit stream, a DTS bit

stream or a standard PCM digital-audio bit stream.

11. IR Remote Input: When the IR sensor on the front panel is blocked (for example,

when the system is installed inside a cabinet); connect an optional IR receiver to the

Remote IR Input connector.

12. HDMI Output (ARC): Connect the BDS system’s HDMI output to your TV’s HDMI

input. If your TV is 3D capable, then you can watch 3D content in 3D either from the BDS

system’s built-in disc player or from other 3D-capable source devices connected to the

BDS system’s HDMI Input connectors (see below). The system’s HDMI output connection

also contains an Audio Return Channel (ARC) that carries a digital audio signal from

your TV or video display back to the BDS. It allows you to listen to HDMI devices that are

connected directly to your TV (such as a digital TV tuner) without making an additional

connection from the device to the BDS system.

NOTE: You must enable the ARC output of your TV. Consult your TV’s instruc-

tion manual for information.

13. HDMI Inputs: You can connect up to three additional source devices to the BDS

system provided the source devices have HDMI connectors. The HDMI connection

transmits digital audio and video signals between devices, so you do not have to

make any additional audio connections for devices you want to connect via an HDMI

connector. The BDS system will pass 3D video signals from 3D capable HDMI source

devices to the TV via the HDMI output connector.

Some HDMI inputs have special functionalities:

• HDMI 1/MHL input: This input accepts both HDMI and MHL connections.

MHL can be used with many mobile smart devices to mirror their audio

and video content on the BDS system while powering the device (check the

owner’s manual of your device). This connector is also compatible with the

Roku Streaming Stick, which allows access to Roku services, controlled by

the BDS remote control.

• HDMI 2 input: This input is a generic input port that accepts devices with

HDMI output. It helps in transmitting encrypted decompressed digital data

from the BDS system to the device connected to the BDS system.

• HDMI 3 (Apple) input: This input accepts any HDMI source device, but if

connected to Apple products, such as the Apple TV or Mac Mini, the BDS

remote can be used to control them (this input on the remote control is

pre-programmed with standard Apple device remote commands).

14. USB Input: You can use the USB port to play audio files from an Apple iOS device

connected to the port, and to play MP3 and WMA audio files and show video and

picture files from a USB device inserted into the port. Insert the connector or device

into the USB port oriented so it fits all the way into the port. You may insert or remove

the connector or device at any time - there is no installation or ejection procedure. You

can also use the USB port to perform firmware upgrades. If an upgrade for the BDS

operating system is released in the future, you will be able to download it to the BDS

system using this port. Complete instructions will be provided at that time.

IMPORTANT: Do not connect a PC or other USB host/controller to this port, or

you may damage both the BDS system and the other device.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon BDS 680 - SET in the language / languages: English as an attachment in your email.

The manual is 1,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon BDS 680 - SET

Harman Kardon BDS 680 - SET User Manual - German - 33 pages

Harman Kardon BDS 680 - SET User Manual - Dutch - 33 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Harman Kardon BDS 680 - SET Manual

Product: