658949
17
Zoom out
Zoom in
Previous page
1/38
Next page
BDS
17
ENGLISH
Connections
Connecting Audio Sources
TV
Tape Deck
-OR-
To Audio
Output
To Play Output
To Coaxial Output
To Optical
Output
To Optical Output
Cable/Satellite Tuner
Digital Audio Source
Analog Audio Inputs 1 and 2: If you have an audio-only analog source component (such
as a tape deck), connect its left and right analog outputs to the Analog Audio Input 1 or
Analog Audio Input 2 jacks as shown in the illustration.
NOTE: To hear a TV show through your BDS system, you need to connect the audio output of
your TV to the BDS receiver. If your TV has a digital-audio output, you can connect it to one of
the BDS receiver’s digital inputs (see below). If your TV does not have a digital-audio output,
you will need to connect the TV’s analog-audio output to the BDS receiver’s Analog Audio
Input 1 or Analog Audio Input 2 jacks.
Coaxial In and Optical 1/Optical 2 In: If you have an audio-only digital source
component (such as a CD changer or video game), you can connect it to one of these inputs,
as shown in the illustration. When using the Optical 1 and Optical 2 digital connections,
gently push the cable connector through the panel connector’s built-in shutter until it is
firmly seated in the connector.
NOTE: Use only one type of digital connection for each source component.
Connecting to a Local Area Network (LAN)
Use a CAT. 5/RJ45 network cable (not supplied) to connect the BDS receiver’s BD-Live
connector directly to a network router, a network switch, a network modem or an Ethernet
network wall jack that has Internet access.
NOTE: The BDS receiver can not access content on other networked devices. The Network
connection enables only the receiver’s BD-Live features. See BD-Live Interactivity, on page 26,
for details.
Network Modem
Cat. 5/5E
To Internet
Connecting the AC Power
The BDS receiver comes with a detachable AC power cord. This type of cord makes it easier for
you to install and connect all other system wiring to the receiver’s rear panel. The subwoofer
has a non-detachable power cord.
NOTES:
The power requirement for the
BDS receiver is 110V – 240V AC, 50/60Hz, 110W (BDS 5
receiver) or 70W (BDS 2 receiver). The power requirement for the subwoofer is 110V –
120V AC, 60Hz, 200W (USA) or 220V – 240V AC, 50/60Hz, 200W (EU). Connecting to a
power source other than the ones listed may damage the receiver or subwoofer, or cause
abnormal operation.
Before connecting the AC power cords to wall outlets, confirm that you have correctly
made all of the speaker connections, video connections and audio-component
connections.
Connect the female end of the receiver’s detachable power cord to the receiver’s AC Power
Input connector. Plug the other end into a working, unswitched AC outlet. Plug the
subwoofer’s power cord into a working, unswitched AC outlet as well.
PL0004-01001
Receiver
110V – 240V, 50Hz/60Hz
Subwoofer
USA: 120V, 60Hz
EU: 220V – 230V, 50Hz/60Hz
Set the receiver’s and subwoofer’s Main Power switches in the “On” position. The receiver’s
Power indicator will turn amber, indicating that the receiver is in the Standby mode.
The subwoofer’s LED will not light up until it receives a turn-on signal. See
Subwoofer
Controls and Connections, on page 7, for details.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon BDS 600 Systeem at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon BDS 600 Systeem in the language / languages: English as an attachment in your email.

The manual is 9,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon BDS 600 Systeem

Harman Kardon BDS 600 Systeem User Manual - German - 38 pages

Harman Kardon BDS 600 Systeem User Manual - Dutch - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info