531040
22
Zoom out
Zoom in
Previous page
1/38
Next page
BDS
22
Setting Up the Receiver
Speaker Settings: This setting allows you to set up the receiver to work properly with the
speakers included in your BDS system. The available configurations are:
2.0: This configuration consists of left and right main speakers but no subwoofer.
t
Selecting this configuration sends all of the bass to the left and right speakers, so be sure
that they are full-range and can handle deep bass.
2.1: This configuration consists of left and right main speakers, plus a subwoofer.
t
BDS 400
and BDS 300 systems are factory-set to this configuration.
3.1: This configuration consists of front left, center and front right speakers, plus a
t
subwoofer. You must manually select this configuration for the BDS 600 system.
5.1: This configuration consists of front left, front right, center, surround left and surround
t
right speakers, plus a subwoofer. BDS 700 and BDS 800 systems are factory-set to this
configuration.
After you select your system’s configuration, the speaker setup screen will appear (BDS 800
and BDS 700 5.1-channel system screen shown):
L (0.0 dB, 3 ft)
R (0.0 dB, 3 ft)
Tone Controls
Audio Out to TV
Speaker Settings
SUB
L
Ls Rs
R
Center
Audio Settings
Setting the speaker distances:
The front left and front right speakers will be highlighted. Press the OK button. The Level 1.
and Distance selection screen will appear.
L (0.0 dB, 3 ft)
R (0.0 dB, 3 ft)
Tone Controls
Audio Out to TV
Speaker Settings
SW1
L
Ls Rs
R
Center
Audio Settings
Level
Distance
Press the Cursor Down button to highlight Distance, and press the OK button. The 2.
Distance adjustment bars will appear.
L (0.0 dB, 10 ft)
R (0.0 dB, 8 ft)
Tone Controls
Audio Out to TV
Speaker Settings
SW1
L
Ls Rs
R
C
Audio Settings
L
R
10
8
Measure the distance from the listening position to each of your systems speakers, 3.
including the subwoofer. Write down the distances.
Use the left and right arrow buttons to adjust the “L bar until it shows the distance you 4.
measured to the front left speaker (the arrowheads indicate which speaker is being
adjusted).
Press the Exit button twice to return to the speaker setup screen (the front left and front 5.
right speakers will still be highlighted).
Press the Cursor Down button. The subwoofer will be highlighted. Press the OK button. 6.
The Level and Distance screen will appear.
Repeat Steps 2 – 6 for the subwoofer. If you have a 7. BDS 800, BDS 700 or BDS 600 system,
repeat Steps 2 – 6 again for the center speaker, and if you have a BDS 800 or BDS 700
system, repeat Steps 2 – 6 again for the surround left and surround right speakers.
When you have entered the distances to all of your system’s speakers, press the Exit 8.
button repeatedly until the harman kardon logo screen appears.
NOTE: Leave all the speaker levels set at “0” for now. You will be able to adjust the individual
speaker levels once your system is set up and youre playing music or films. See Adjusting
Individual Speaker Volumes, on this page.
Information Menu
Select to browse system information
Information
Software Version: BDS V1.04.06
MAC Address: 00 -1B -44 -12 -1D
The Information menu will display the receiver’s software/firmware version number and the
player’s factory-assigned network MAC Address. This screen is for information only and allows
no user adjustments.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon BDS 477 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon BDS 477 in the language / languages: English as an attachment in your email.

The manual is 6,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon BDS 477

Harman Kardon BDS 477 User Manual - German - 38 pages

Harman Kardon BDS 477 User Manual - Dutch - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info