658950
13
Zoom out
Zoom in
Previous page
1/38
Next page
BDS
13
ENGLISH
Mounting Options for Satellite and Center Speakers
Wall-Mounting the BDS 800 Center Speaker
Decide on the location for the speaker (see 1. Placing the Speakers (BDS 800, BDS 700, BDS
400 and BDS 300 Systems), on page 10).
Attach the center-speaker wall-mount bracket to the wall using hardware that is 2.
appropriate for the wall’s construction and materials. Attach the anchors through the
holes shown in the illustration.
Use These Holes to Attach
Bracket to Wall
NOTE: The center speaker weighs 3.2 lb (1.45kg). Be sure to use hardware that can support
this weight.
CAUTION: Before making speaker connections, be sure that your receiver or
amplifier is turned OFF and, preferably, its AC cord is unplugged from the AC
power source.
Connect the speaker wire to the speaker terminals.3.
+
A. Push Down on Cap
to Open Hole
B. Insert Bare Wire
into Open Hole
C. Release Cap
to Secure Wire
Colored Band
to Red Terminal
Using two of the supplied screws, attach the center speaker to the wall-mount bracket, as 4.
shown in the illustration.
Wall-Mount
Bracket
Supplied Screws
Wall-Mounting the BDS 700 and BDS 300 Satellite Speakers
Remove the black shelf stand from the bottom of the speaker by unscrewing the bolt. 1.
Store the shelf stand and bolt in a safe place in case you need them in the future.
1. Remove Bolt
2. Remove Stand
Determine the locations for the speakers. (See 2. Placing the Speakers (BDS 800, BDS
700, BDS 400 and BDS 300), on page 10, for more information.) If possible, position
the speakers so that the mounting screws (not included; use size #8) can be installed
directly into a wall stud. If that is not possible, use optional wall anchors that are rated
to support at least 25 lb (11.3kg) and are appropriate for the construction and materials
of your wall. The customer is responsible for the proper selection and use of
mounting hardware, available through hardware stores, to wall-mount the
speakers properly and safely.
Bring the speaker cable through the wall-bracket attachment plate, and mount the 3.
attachment plate on the wall in the desired location.
Bring Speaker Cable Through Opening
Thread the speaker cable through the arc-shaped opening on the top of the mounting 4.
bracket, not the screw hole.
Cable to Speaker
Cable from Wall
Plate
Side ViewOverhead View
Bring Speaker Cable Through
Arc-Shaped Opening
Attach the mounting bracket to the wall plate by inserting the tab at the top of the 5.
attachment plate into the slot on top of the bracket and snapping the bracket onto the
attachment plate.
Insert Tab into Slot and Snap
Bracket onto Plate
Feed Cable Through Mount
and out of Opening
Fit the terminal cover onto the bracket as shown in the illustration 6. below, then connect
the speaker leads to the terminals on the underside of the speaker. Remember to observe
the correct polarity. See Connecting the Satellite and Center Speakers (BDS 700 and BDS
300 systems), on page 15, for more information.
Terminal Cover
Mounting Bracket
Side View
Connect Cable Leads to
Speaker Terminals
Fit the terminal cover into the opening on the underside of the speaker so that it is flush 7.
against the speaker and covers the terminals. Insert the supplied long bracket bolt up
through the bottom of the bracket and terminal cover, and screw it into the threaded
insert on the underside of the speaker. The bolt should be snug but not so tight as to
prevent the speaker from pivoting on the bracket.
Fit Terminal Cover into Recess
on Speaker Bottom
Attach Speaker to Bracket
Using Long Bolt
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon BDS 400 Systeem at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon BDS 400 Systeem in the language / languages: English as an attachment in your email.

The manual is 9,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon BDS 400 Systeem

Harman Kardon BDS 400 Systeem User Manual - German - 38 pages

Harman Kardon BDS 400 Systeem User Manual - Dutch - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info