658951
12
Zoom out
Zoom in
Previous page
1/38
Next page
BDS
12
Mounting Options for Satellite and Center Speakers
Attach the wall portion of the wall-mount bracket onto the wall using hardware that is 4.
appropriate for the wall’s construction and materials. We recommend first anchoring the
bracket using its keyhole, then attaching it with another anchor through its top opening,
as shown in the illustration. The satellite speakers weigh 3.3 lb (1.5kg). Be sure to use
hardware that can support this weight.
Top Opening
Keyhole Opening
Bottom Opening
NOTE: If you’re running the speaker wire through the wall, you can bring it out directly behind
the bracket location and insert it through the bottom opening in the wall portion of the
bracket, as shown in the illustration. This move will keep the wire completely hidden from
view once the installation is complete.
Insert Wire into
Bottom Opening
Bring Wire Out
Through Here
If youre not running the speaker wire through the wall, insert it through the wall portion 5.
of the wall-mount bracket as shown in the illustration.
Pass the speaker wire through the speaker portion of the wall-mount bracket as shown 6.
in the illustration.
Bring Wire Out
Through Here
Bring Wire In
Through Here
If you have not already removed the speaker’s base, do so by pulling it straight off the 7.
speaker, as shown in the illustration. Applying even pressure to both sides of the base
will allow it to slide off smoothly.
Apply Pressure Evenly to Both
Sides of Base
Lift Base Straight off Speaker
CAUTION: Before making speaker connections, be sure that the BDS receiver is
turned OFF and, preferably, its AC cord is unplugged from the AC outlet.
Connect the speaker wire to the speaker terminals as shown in the illustration:8.
+
A. Push Down on Cap
to Open Hole
B. Insert Bare Wire
into Open Hole
C. Release Cap
to Secure Wire
Colored Band
to Red Terminal
IMPORTANT: Make sure the (+) and (–) bare wires do not touch each other or the other
terminal. Touching wires can cause a short circuit that can damage your receiver or amplifier.
Slide the speaker portion of the wall-mount bracket onto the speaker as shown in the 9.
illustration below. Fit the grooves on the bracket onto the rails in the speaker, and apply
even pressure on both sides of the bracket so it slides straight onto the speaker.
Push the bracket all the way onto the speaker until it snaps into place.
Pull any slack speaker wire back through the bracket as you slide the bracket onto the
speaker.
Fit Bracket Grooves
onto Speaker Rails
Push Down Evenly on
Both Sides of Bracket
Slide the speaker onto the bracket’s wall section as shown in the illustration. Pull any 10.
slack speaker wire back through the bracket’s wall section.
Slide Speaker
onto Bracket
Fit the metal stop plate into the recess on the bottom of the bracket with the pad facing 11.
the bracket, and fasten it to the bracket using two of the supplied screws. Fastening it
will prevent the speaker from detaching from the bracket and will hold the speaker’s
position as you rotate it on the mount.
Stop Plate
Supplied Screws
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon BDS 300 Systeem at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon BDS 300 Systeem in the language / languages: English as an attachment in your email.

The manual is 9,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon BDS 300 Systeem

Harman Kardon BDS 300 Systeem User Manual - German - 38 pages

Harman Kardon BDS 300 Systeem User Manual - Dutch - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info