502834
15
Zoom out
Zoom in
Previous page
1/38
Next page
ENGLISH
15
BDS
Preparing the Remote Control
and Setting Up the Receiver
1. Press and hold the source button for the main device the remote will be operating.
The button will light up, go dark and then light up again. Release the button.
2. Select the type of punch-through programming.
a) For “punch-through” channel control, press the Channel + button.
b) For “punch-through” transport control, press the Play button.
3. Press the Aux button. The original source button will flash to confirm operation.
You can repeat Step 1 – Step 3 for any of the remote’s source buttons (Disc, Radio, etc.).
NOTE: “Punch-through” channel and transport commands will override the existing
commands for those buttons in the source modes you program.
To undo “punch-through” programming, follow the same steps as above, but press the
same source button in Step 1 and Step 3.
Erasing a Learned Code and Restoring the Original Button Code
1. Press and simultaneously hold down the Aux and Bookmark (Green) buttons on
the BDS remote control for at least three seconds. The BDS remote will enter the
learning mode after the Aux button LED turns on.
2. Press and release the remote control button that you want to erase. The Aux button’s
LED will flash three times.
3. To erase other buttons, press the selected buttons.
4. To exit the erase mode, press Aux button.
Resetting the Remote to Factory Default Condition
1. Press and simultaneously hold down the Aux and Thumbnail (Yellow) buttons on the
BDS remote control for at least three seconds.
2. The Aux LED will flash three times and exit learn-erase mode. Note: By erasing all
learned codes, all of the BDS remote buttons will return to their original functions.
Controlling an Apple TV
If you have connected an Apple TV to the BDS receiver’s HDMI 3 input, you can also use
the BDS remote to control an Apple TV that is streaming audio and video files stored
on your home network, or accessing media from an Internet service such as Netflix, as
shown in the illustration below.
Menu
Button
Cursor Right Button
OK Button
Up Button
Right Button
Play/Pause Button
Cursor Left
Button
Left Button
Down
Button
Play/Pause
Button
Select any other input source to return the BDS remote to its normal operation.
Using the Remote After it is Programmed
Pressing the remote’s Aux Input button will put the remote into the auxiliary-control mode,
and it will control the auxiliary component(s) via the codes you have programmed into it.
To switch the remote back to the BDS receiver-control mode from the auxiliary-control
mode, press any of the other Input buttons or the Home button.
Setting Up the Receiver
NOTE: The menu screens shown in this manual are for illustrative purposes and may
differ somewhat from the actual displays.
To set up your BDS receiver, you will use the remote to navigate through all of the on-
screen menus and to make selections from them.
Use the Cursor Up/Down buttons to navigate through the menu list. When an item is
highlighted, a border will appear around it.
To select a highlighted item, press the OK button. The screen will change depending
on your selection.
To return to the previous screen, press the Previous button.
Initial Setup
When you turn your BDS receiver on for the first time, the on-screen menu will display
the Initial Setup screen. The first screen lets you set the language you want the BDS
receiver to use.
Initial Setup
Please select which language you would like the
BDS menus to appear in.
Step 1/6
Next
OK
After you set the language, press the OK button and the Initial Setup introduction screen
will appear.
Initial Setup
Welcome to the Harman Kardon BDS setup wizard.
Some simple information is needed to ensure you
get the best experience from your product.
You can adjust these settings later in addition to making
changes to more advanced settings by selecting 'Settings;'
from the Home menu.
Previous
Step 2/6
Next
OK
15


Need help? Post your question in this forum.

Forumrules
1

Forum

harman-kardon-bds-277

Reset search

  • How do you connect your phone to system via Bluetooth Submitted on 26-10-2022 at 19:53

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon BDS 277 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon BDS 277 in the language / languages: English as an attachment in your email.

The manual is 6,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon BDS 277

Harman Kardon BDS 277 User Manual - German - 38 pages

Harman Kardon BDS 277 User Manual - Dutch - 38 pages

Harman Kardon BDS 277 User Manual - French - 38 pages

Harman Kardon BDS 277 User Manual - Italian - 38 pages

Harman Kardon BDS 277 User Manual - Spanish - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info