502832
19
Zoom out
Zoom in
Previous page
1/38
Next page
ENGLISH
19
BDS Setting Up the Receiver
4. Remain silent while the test noise plays through the speakers. As the test noise
circulates among the speakers the screen will show which speaker is being tested.
EzSet/EQ automatic setup can calibrate the BDS system and configure
loudspeaker parameters automatically to get the best sound performance.
EzSet/E
Q
(Automatic Setu
p
)
T
esting...
P
lease kee
p
room
silent during EzSet/E
Q
.
S
S S
Audio Settings
5. When the testing process is completed, the “Testing...” message on the screen will
change to “Test complete.”
6. Press the Back button to exit the EzSet/EQ test procedure.
NOTE: If the test fails, the “Testing...” message on the screen will change to “Test failed,
please make sure all speakers are connected correctly and the room is quiet then try
again.” Press the Back button, make sure all speakers are correctly connected and
perform the test again from Step 4. Make sure that the room remains quiet during the
test.
Manual Configuration: After you select your speaker system’s configuration, the speaker
setup screen will appear:
Tone Controls
Audio Output
Speaker Settings
Left (0.0 dB, 0.0m/0ft)
Right (0.0 dB, 0.0m/0ft)
SUB
L
LS RS
R
C
Audio Settings
Setting the speaker distances:
1. The front left and front right speakers will be highlighted. Press the OK button. The
Level and Distance selection screen will appear.
Tone Controls
Audio Output
Speaker Settings
Left (0.0 dB, 0.0m/0ft)
Right (0.0 dB, 0.0m/0ft)
SUB
L
LS RS
R
C
Level
Distance
Audio Settings
2. Press the Cursor Down button to highlight Distance, and press the OK button. The
Distance adjustment bars will appear.
Tone Controls
Audio Output
Speaker Settings
Left (0.0 dB, 0.0m/0ft)
Right (0.0 dB, 0.0m/0ft)
SUB
L
LS RS
R
C
Audio Settings
L
0
0
Left
Right
3. Measure the distance from the listening position to each of your system’s speakers,
including the subwoofer. Write down the distances.
4. Use the Cursor Left and Right buttons to adjust the “L bar until it shows the distance
you measured to the front left speaker (the arrowheads indicate which speaker is
being adjusted).
5. Press the Cursor Down button to highlight the “R” bar. Use the Cursor Left and Right
buttons to adjust the bar until it shows the distance you measured to the front right
speaker.
6. Press the Back button twice to return to the speaker setup screen (the front left and
front right speakers will still be highlighted).
7. Press the Cursor Down button. The subwoofer will be highlighted. Press the OK
button. The Level and Distance screen will appear.
8. Repeat Steps 2 – 7 for the center speaker, surround speakers and subwoofer.
9. When you have entered the distances to all of your system’s speakers, press the
Back button repeatedly to return to the Home Menu screen.
NOTE: Leave all the speaker levels set at “0” for now. You will be able to adjust the
individual speaker levels once your system is set up and you’re playing music or films.
See Adjusting Individual Speaker Volumes, on page 20.
Information Menu
MAC Address:
Softare Verison:
MCUVer : 41.0
MCU2Ver : 15
000 -1C -50 00 -D9 -50
BDS_275 EU V2.3.0
DspVer : 17
MFIVer : 6
Information
The Information menu will display the receiver’s software/firmware version number and
the receiver’s factory-assigned network MAC address. This screen is for information only
and has no user adjustments.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon BDS 275 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon BDS 275 in the language / languages: English as an attachment in your email.

The manual is 6,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon BDS 275

Harman Kardon BDS 275 User Manual - German - 38 pages

Harman Kardon BDS 275 User Manual - Dutch - 38 pages

Harman Kardon BDS 275 User Manual - French - 38 pages

Harman Kardon BDS 275 User Manual - Italian - 38 pages

Harman Kardon BDS 275 User Manual - Spanish - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info