476554
18
Zoom out
Zoom in
Previous page
1/34
Next page
18
Setting Up the Receiver
EZ Set/EQ: The BDS receiver’s EZSet/EQ™ system uses the supplied EzSet/EQ
microphone to perform this important step automatically. Before beginning, be sure you
have correctly connected your speakers to the BDS receiver. IMPORTANT: Press the
remote’s “Disc” input button before performing the EZ Set/EQ procedure. The EZ
Set/EQ procedure is only available when the Disc input is selected.
1. Plug the supplied EzSet/EQ microphone into the BDS receiver’s Headphone connector.
2. Place the microphone at ear height in your main listening position.
3. Press the remote control’s Home button. The receiver’s Home Menu screen will
appear on the TV.
1 / 5Exit Option
Type: Settings
Home Menu
Blu-ray Disc
FM Radio
HDMI input
Component input
Playlist
Settings
OPTIONS
HOME
4. Use the Cursor and OK buttons to highlight and select Settings. The General Settings
menu will appear.
Select to adjust general settings
System
Language
Playback
Parental Control
Network
General Settings
5. Use the right Cursor button to select Audio Settings, then use the down Cursor button
to select Speaker Settings. The Speaker Settings screen will appear.
Select to adjust speaker settings
Tone Controls
Audio Output
Speaker Settings
EzSet/EQ
Manual Configuration
2.0
2.0
Audio Settings
6. Press the right Cursor button to select EzSet/EQ, then use the cursor buttons to
select the configuration of your speaker system.
The EzSet/EQ automatic setup can calibrate the BDS system and configure the
loudspeakers parameters automatically to get the best sound performance.
Tone Controls
Audio Output
Speaker Settings
EzSet/EQ
Manual Configuration
Off
2.0
2.1
3.1
5.1
Audio Settings
7. Press the OK button, then press it again to select Continue in the EzSet/EQ (Automatic
Setup) box that appears.
The EzSet/EQ automatic setup can calibrate the BDS system and configure the
loudspeakers parameters automatically to get the best sound performance.
Tone Controls
Audio Output
Speaker Settings
EzSet/EQ
Manual Configuration
Off
2.0
2.1
3.1
5.1
Audio Settings
EzSet/EQ(Automatic Setup)
Please plug the microphone into the system and
then place it at ear level at your desired listening
position. If a Subwoofer is connected, set the level
control (on the Sub) to half.
Continue Cancel
8. Remain silent while the test noise plays through the speakers. As the test noise
circulates among the speakers the screen will show which speaker is being tested.
The current testing speaker is L
EzSet/EQ(Automatic Setup)
Testing...
Please keep room silent.
SUB
L
LS RS
R
C
Audio Settings
9. When the testing process is completed, the “Testing...” message on the screen will
change to “All test done!”
10. Press the Clear/Exit button to exit the EzSet/EQ test procedure.
NOTE: If the test fails, the “Testing...” message on the screen will change to “Test failed,
please make sure the speaker is connected correctly and room is silent, then retest.”
Press the Clear/Exit button, make sure all speakers are correctly connected and perform
the test again from Step 6. Make sure that the room remains silent during the test.
BDS 270/BDS 570
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon BDS 270 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon BDS 270 in the language / languages: English as an attachment in your email.

The manual is 9,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon BDS 270

Harman Kardon BDS 270 User Manual - German - 38 pages

Harman Kardon BDS 270 User Manual - Dutch - 34 pages

Harman Kardon BDS 270 User Manual - French - 34 pages

Harman Kardon BDS 270 User Manual - Italian - 34 pages

Harman Kardon BDS 270 User Manual - Swedish - 34 pages

Harman Kardon BDS 270 User Manual - Spanish - 34 pages

Harman Kardon BDS 270 User Manual - Finnish - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info