502655
30
Zoom out
Zoom in
Previous page
1/40
Next page
AVR85 120 rev (g) 6/14/97
On-Screen Display
AUDIO or VIDEO. When either input
type is highlighted in reverse video use
the or buttons i to select the
source you wish to listen to or view.
Remember that the video source should
be selected first when you wish to watch
one source and listen to another.
To select a digital audio input use the
or ¤ buttons i to position the on-
screen cursor >next to DIGITAL. Press
Select j and note that the word
DIGITAL will be highlighted in reverse
video. Then use the or buttons i
to select the desired digital source. Note
that when the digital source is selected,
the audio source will indicate
**
.
You may also use this menu to turn the
attenuation, or ATT, function on for this
source only by moving the cursor to the
ATT line and using the or buttons
i to select ON or OFF. When the ATT
function is enabled the input level is
reduced to prevent overloading the input
circuits.
SURROUND MODE: At this menu (see
figure #15) you may change the
surround mode by using the or ¤
buttons i to position the on-screen
cursor > next to MODE and using the
or buttons i to select the desired
mode. To change the delay time position
the cursor next to SURROUND CH and
then use the or buttons i to select
desired delay time for the surround
channels. Note that an adjustment for
the delay time of the center channel is
possible only in the Dolby Digital mode.
TEST TONE: At this menu you may
adjust the speaker output levels. For
information on this procedure, refer to
the System Configuration section of this
manual.
MULTI-ROOM SEL: For information
on configuring and using the multiroom
audio functions of the AVR85, consult the
appropriate section of this manual.
SET UP MENU: For information on
using the Setup menus, refer to the
System Configuration section of this
manual.
SLEEP TIMER SET: This enables you
to set the sleep timer, which you will
place the unit in a standby mode after a
set period of time. To reach this menu,
press the or ¤ buttons i to
position the on-screen cursor >next to
SLEEP TIMER and press Select j.
At the next screen, the SLEEP TIMER
SET menu (see figure #16) the cursor
will be next to TIMER SET. Use the
or buttons i to select the amount of
time before turn off and note that the
time will blink. Press the ¤ button so
that the on-screen cursor >
is next to TIMER ON OFF. Use the
or buttons i to highlight ON and
press Select j. The time figure will
stop flashing indicating that the timer
has been started. Press ¤ one more time
so that the cursor is next to RETURN
TO MAIN MENU and press select. Note
that when the MAIN MENU returns to
the screen the time figure will appear
next to the words SLEEP TIMER. You
may check the time remaining before
shut off at any time by pressing the
Sleep button z on the remote and
viewing the on-screen display (see figure
#12).
Position the on-screen cursor >next
to MENU OFF at any time to exit the
menu system and return to normal
operation.
27
SLEEP TIMER SET
TIMER SET 10min
TIMER OFF ON
RETURN TO MAIN MENU
Figure 16
MODE :PRO LOGIC
DELAY TIME CONTROL
CENTER CH :NONE
SURROUND CH :2ms
RETURN TO MAIN MENU
SURROUND MODE
Figure 15
AVR85 om (g) 9/16/98 11:21 AM Page 27
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon AVR85 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR85 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info