502655
15
Zoom out
Zoom in
Previous page
1/40
Next page
Remote Control Functions
12
AVR85 120 rev (g) 6/14/97
v Memo: The memo button is used
to enter stations to the tuner’s preset
memory in either the manual or auto-
matic modes. It is also used in the
process of clearing the memory. This
button also performs the functions
of the “
*
” symbol on compatible
equipment.
w P-Scan: Press this button to
automatically scan through the sta-
tions preset into the tuner memory.
Press the button again to end the
scan when the tuner stops at the
desired station. This button also per-
forms the functions of the “#” symbol
on compatible equipment.
x Number Keys: These buttons
serve as a ten button numeric key-
pad to enter tuner preset positions.
They are also to be used to select
channel numbers when TV has
been selected on the remote, or to
select track numbers on a CD, DVD
or LD player, depending on how the
remote has been programmed.
The letters below the buttons are
used to enter information for tuner
station names.
NOTE: The 0 button has a dual func-
tion. It also serves as the CLEAR
button for use in programming the
tuner or clearing the system memory.
y Surround Mode Selection:
Press one of these buttons to select
a surround mode for the current
listening session.
b. When CD is selected and the unit
is a CD changer, these buttons
will change to the next disc
or
previous disc Â.
c. When Tape 1 or Tape 2 is the
input source, and the tape
machine is a compatible Harman
Kardon dual cassette deck, these
buttons will switch between the
“A” and “B” sides.
u Channel/Skip: These buttons
have multiple functions, which
vary according to the input device
selected and the codes pro-
grammed from another remote.
a. When TV, Vid 1 or Vid 2 are
selected, they may function as
the channel up · or channel
down tuning buttons when
programmed with the codes from
another unit’s remote.
b. When CD is selected these
buttons act as forward and
reverse “Skip” buttons to move
to the next track or chapter on
the disc.
c. When a compatible Harman
Kardon cassette player has been
selected as Tape 1 or Tape 2,
these buttons move the tape
forward · or backwards to
the next selection using the Music
Scan feature.
z Sleep: Pressing this button
when the Sleep timer has previously
been activated allows you to view
the time remaining before the timer
function turns the unit off. When the
remote is in the AM/FM mode d,
the Sleep function may also be set
by pressing this button so that the
Sleep indicator E blinks. Press the
Memo and Sleep buttons within five
seconds to set the desired sleep
time in the following order:
When the desired time is shown in
the display press the Memo button
^v to enter the time. The unit will
go into the Standby mode when the
time entered has elapsed.
` Learn LED: This indicator will
illuminate when a button on the
remote is being programmed with
signals from another remote during
the “learning” mode. The light will go
out when the signal is received and
memorized.
Sending LED: This indicator
should flash any time a button is
pressed to confirm that a command
is being sent to the receiver or
another unit. If the light is dim or
does not illuminate when a button is
pressed the batteries in the remote
should be replaced.
10
min
20
min
30
min
60
min
90
min
OFF
AVR85 om (g) 9/16/98 11:21 AM Page 12
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon AVR85 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR85 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info