• Stereo or Mono program material• The surround decoder may not create center- or rear-channel
information from nonencoded programs
Unit does not respond to• Weak batteries in remote• Change remote batteries
remote commands• Wrong device selected• Press the AVR selector
• Remote sensor is obscured• Make certain that the front-panel sensor is visible to the remote,
or connect remote sensor
Intermittent buzzing in tuner• Local interference• Move the unit or antenna away from computers,fluorescent
lights,motors or other electrical appliances
An UNLOCKmessage appears • The type of digital audio stream • Wait a second or two for the unit’s processor to recognize the new data
in the display and/or the letters has been changed stream and automatically resume playback
in the Channel Indicator display flash • Digital audio feed paused• Resume DVD playback.
at the same time as the audio stops
In addition to the items shown above,additional information on troubleshooting possible problems with your AVR 7300,or installation-related issues,may be found in the
list of “Frequently Asked Questions” which is located in the Product Support section of our Web site at www.harmankardon.com.
33
Processor Reset
In the rare case where the unit’s operation or the dis-
plays seem abnormal, the cause may involve the erratic
operation of the system’s memory or microprocessor.
To correct this problem,first unplug the unit from the
AC wall outlet and wait at least three minutes. After the
pause,reconnect the AC power cord and check the
unit’s operation.If the system still malfunctions, a
system reset may clear the problem.
To clear the AVR 7300’s entire system memory
including tuner presets,output level settings,delay
times and speaker configuration data,first put the unit
in Standby by pressing the Standby/On Button 1.
Next,press and hold the Surround Mode Group
Selector 2and the Tuner Mode Selector 8
buttons for three seconds.
The unit will turn on automatically and display the
RESETmessage in the Upper Display Line $.
NOTE: Resetting the processor will erase any configu-
ration settings you have made for speakers,output
levels,surround modes,digital input assignments as
well as the tuner presets.After a reset the unit will be
returned to the factory presets, and all settings for
these items must be reentered.
If the system is still operating incorrectly, there may
have been an electronic discharge or severe AC line
interference that has corrupted the memory or
microprocessor.
If these steps do not solve the problem,consult an
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Harman Kardon AVR7300 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Harman Kardon AVR7300 in the language / languages: English as an attachment in your email.
The manual is 1,17 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
