502638

Harman Kardon AVR7300 Manual

51
Zoom out
Zoom in
Previous page
1/60
Next page
CONFIGURING THE REMOTE 51
CONFIGURING THE REMOTE
next to the bracketed read-out of the underlying
device (e.g., [AVR] POWER ON).
6. When you are finished reviewing the macro’s
contents, press the Set Button
q
to return
the remote to normal operation.
Punch-Through Configuration
Punch-through is a capability of the remote that
allows the Volume controls, Channel Up/Down buttons
or Transport keys (Play, Stop, Record, Fast Forward
and Reverse, and Skip Up/Down) to link to a different
device. For example, if your TV, cable box or satellite
receiver is connected through the AVR 7300, you will
most likely want to use the AVR 7300’s volume con-
trol commands even when the remote has been set
to issue all other commands for the video device.
“Punch-through” enables you to easily program the
remote to do this.
Volume Punch-Through
Follow these steps to enable the Volume Up/Down
and Mute controls from one device to be used when
the remote is otherwise programmed for a different
device.
NOTE FOR VOLUME PUNCH-THROUGH: The
remote’s default settings are for the AVR 7300’s vol-
ume controls, to be used when any input or device is
selected, with the exception of the VID 2/TV button.
There is no need to program the remote for volume
punch-through for the AVR 7300’s controls with other
sources, such as DVD. To have the AVR 7300’s vol-
ume commands used when the TV device is selected,
follow these steps:
1. Press and hold the Program Button
O
for
about three seconds while the message shown
in Figure 18 appears in the remote’s LCD
Information Display
2
. Release the button
when the red light under the Set Button
q
appears.
2. The remote’s MAIN MENU message (Figure
22), will appear in the LCD display and the Set
Button
q
will remain illuminated in red. Press
the
⁄
/
¤
Navigation Button o until
PUNCH-THROUGH appears on the bottom
line of the LCD screen, as shown in Figure 54.
Press the Set Button
q
to enter the main
punch-through menu branch.
Figure 54
3. At the next menu screen (Figure 55), press the
Set Button
q
to begin programming the
remote for Volume punch-through.
Figure 55
4. The next display screen (Figure 56) is where
you select the device that will receive the punch-
through commands. In our example, that is the
VID 2/TV button, as that is where we want the
AVR 7300’s volume controls to be active. Press
the
⁄
/
¤
Navigation Button o until the
name of the base device appears and then press
the Set Button
q
.
Figure 56
5. At the next display screen (Figure 57), you will
select the device whose Volume Up/Down and
Mute commands will be used. Press the
⁄
/
¤
Navigation Button o until the desired device’s
name appears to the right of the device in use. In
our example, that is the AVR 7300 (indicated by
AVR). When the desired combination of devices
appears, press the Set Button
q
.
Figure 57
6. When the Set button is pressed, the display will
change to show you that the new combination of
control commands is being saved to the unit’s
memory, as shown in Figure 58. The word
SAVED will flash four times and then the remote
will return to normal operation.
Figure 58
7. Once the punch-through is programmed, the
Volume Up/Down and Mute buttons of the second
device named will be used when those buttons
HW
are pressed while the master device
is in use.
Returning the Volume Control Settings to
Default Operation
If you wish to remove the Volume punch-through so
that the commands for Volume and Mute are returned
to the factory default setting, follow the steps shown
above, except that in Steps 4 and 5, select the same
device for both the DEVICE IN USE on the left
side of the bottom line and the PUNCH-THROUGH
device. In the example used, the display to return the
remote to default settings will appear as shown in
Figure 59.
Figure 59
Channel Punch-Through
Channel punch-through allows the Channel Up/Down
buttons to send commands to a different device than
the one that has been selected for other commands.
For example, you may wish to use a cable box or
satellite receiver as the source for a VCR, so you
would
want the Channel Up/Down Buttons Y to
transmit commands to the cable box even though the
other button commands are programmed to operate
the VCR.
To program the remote for channel punch-through,
follow these steps. This example will show how to pro-
gram channel punch-through so that the commands
programmed for Channel Up/Down for the VID 3/
Cable device will be transmitted when the VID 1/VCR
device has been selected as the current device.
1. Press and hold the Program Button
O
for
about three seconds while the message shown
in Figure 21 appears in the remote’s LCD
Information Display
2
. Release the button
when the red light under the Set Button
q
appears.
2. The remote’s MAIN MENU message (Figure
22), will appear in the LCD display and the
Set Button
q
will remain illuminated in red.
Press the
⁄
/
¤
Navigation Button o until
PUNCH-THROUGH appears on the bottom
line of the LCD screen, as shown in Figure 54.
Press the Set Button
q
to enter the main
punch-through menu branch.
3. At the next menu screen, press the
⁄
/
¤
Navigation Button o until CHANNEL
appears on the bottom line of the LCD screen,
as shown in Figure 60. Press the Set Button
q
to begin programming the remote for
channel punch-through.
Figure 60
4. The next display screen (Figure 61) is where you
select the device that will receive the punch-
through commands. In our example, that is the
VID 1/
VCR button, as that is where we want the
cable box’s channel controls to be active. Press
the
⁄
/
¤
Navigation Button o until the
name of the base device appears and then
press the Set Button
q
.
Figure 61
5. At the next display screen (Figure 62), you will
select the device whose Channel Up/Down com-
mands will be used. Press the
⁄
/
¤
Navigation
DEVICE IN USE
VCR
PUNCH-THROUGH
CHANNEL
PUNCH-THROUGH
TV< -TV
TV< -AVR [VOL]
SAVED
PUNCH-THROUGH
TV< -AVR
DEVICE IN USE
TV
PUNCH-THROUGH
VOLUME
MAIN MENU
PUNCH-THROUGH
AVR7300(120v)-OM 6/14/04 9:16 AM Page 51
… 51 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon AVR7300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR7300 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info