502638
43
Zoom out
Zoom in
Previous page
1/60
Next page
ADVANCED FEATURES 43
ADVANCED FEATURES
To adjust the on-screen appearance of the semi-OSD
system, press the OSD Button U to bring the
MASTER MENU to the screen. Press the
¤
Navigation Button o, until the on-screen
cursor is next to the ADVANCED line. Press the
Set Button q to enter the ADVANCED
SELECT menu (Figure 19).
When the ADVANCED SELECT menu
(Figure 19) appears, press the
/
¤
Navigation
Button o so that the on-screen cursor is point-
ing to the SEMI OSD/TIME OUT line.
Select one of these options:
To keep the semi-OSD system activated, but to
adjust the length of time the displays remain on the
screen, press the
/
Navigation Button o
until the desired time-out is shown. The default
setting is 5 seconds.
To turn the semi-OSD system off so that it does not
appear at any time, press the
/
Navigation
Button o so that OFF is shown on the right
side of the line.
If you wish to make other adjustments, press the
/
¤
Navigation Button o until the on-screen
cursor is next to the desired setting or the BACK
TO MASTER MENU line and press the Set
Button q. If you have no other adjustments to
make, press the OSD Button U to exit the
menu system.
Full-OSD Time-Out Adjustment
The FULL OSD menu system is used to simplify
the setup and adjustment of the AVR 7300 by using a
series of on-screen menus. The factory default setting
for these menus leaves them on the screen for 20
seconds after a period of inactivity before they disap-
pear from the screen (Time-Out). Time-Out is a safety
measure to prevent image retention of the menu text
in your monitor or projector, which might happen if the
menus were left on indefinitely. However, you may
prefer a different time period before the on-screen
display disappears.
To change the full-OSD Time-Out, you will need
to make an adjustment in the ADVANCED
SELECT menu (Figure 19). To start the adjust-
ment, press the OSD Button U to bring the
MASTER MENU to the screen. Press the
¤
Navigation Button o, until the on-screen
cursor is next to the ADVANCED line. Press the
Set Button q to enter the ADVANCED
SELECT menu (Figure 19).
At the ADVANCED SELECT menu (Fig. 19)
make certain that the on-screen cursor is next to
the FULL OSD TIME OUT line by pressing
the
/
¤
Navigation Button o as needed. Next,
press the
/
Navigation Button o until the
desired time is displayed in seconds. Unlike most of
the other options in this menu, this is a permanent
setting change, and the Time-Out entry will remain in
effect until it is changed, even if the unit is turned off.
If you wish to make other adjustments, press the
/
¤
Navigation Button o until the on-screen
cursor is next to the desired setting or the
BACK TO MASTER MENU line and press
the Set Button q. If you have no other adjust-
ments to make, press the OSD Button U to exit
the menu system.
AVR7300(120v)-OM 6/14/04 9:15 AM Page 43
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon AVR7300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR7300 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info