502637
7
Zoom out
Zoom in
Previous page
1/52
Next page
FRONT-PANEL INFORMATION DISPLAY
FRONT-PANEL INFORMATION DISPLAY 7
B
C
E
F
G
H
IJ
K
L
A
D
A Upper Display Line
B Lower Display Line
C OSD Indicator
D Multiroom Indicator
E Speaker/Channel Input Indicators
F PRESET Indicator
G MEMORY Indicator
H STEREO Indicator
I TUNED Indicator
J AUTO Indicator
K 192kHz Indicator
L 96kHz Indicator
A Upper Display Line: Depending on the unit’s status,
a variety of messages will appear here. In normal opera-
tion, the current audio and video input source information
will appear on this line.
B Lower Display Line: Depending on the unit’s
status, a variety of messages will appear here. In nor-
mal operation, the current surround mode name will
appear on this line.
C OSD Indicator: When the OSD system is in use,
this indicator lights to remind you that the other indica-
tors in this display do not function when the On-
Screen Display is being used.
D Multiroom Indicator: This indicator lights when
the multiroom system is active. It will remain lit when
the multiroom system is in use even though the main
room system is in the Standby mode and all other
indicators are dark. (See page 36 for more informa-
tion on the Multiroom system.)
E Speaker/Channel Input Indicators: These indica-
tors are multipurpose, indicating either the speaker type
selected for each channel or the incoming data-signal
configuration. The left, center, right, right surround, left
surround, right surround back and left surround back
speaker indicators are composed of three boxes, while
the subwoofer is a single box. The center box lights
when a “Small” speaker is selected, and the
two outer
boxes light when “Large” speakers are selected.When
none of the boxes are lit for the center, surround
or sub-
woofer channels, no speaker has been selected for one
of those positions. (See page 21 for more information
on speaker setup.) The letters inside each of the
center
boxes display the active input channels. For standard ana-
log inputs, only the L and R will light, indicating a stereo
input. When a digital source is playing, the indicators
will
light to display the channels being received at the digital
input. When the letters flash, the digital input has been
interrupted. (See page 31 for more information on the
Channel Indicators.)
F PRESET Indicator: This indicator lights when the
tuner is in use to show that the preset number for the
current station being listened to appears in the Upper
Display Line. (See page 32 for more information on
tuner presets.)
G MEMORY Indicator: This indicator flashes when
entering presets and other information into the tuner’s
memory.
H STEREO Indicator: This indicator lights when an
FM station is being tuned in stereo.
I
TUNED Indicator:
This indicator lights when a sta-
tion is being received with sufficient signal strength to
provide acceptable listening quality.
J AUTO Indicator: This indicator lights when the
tuner’s Auto mode is in use.
K 192kHz Indicator: This indicator lights when the
input source has a 192kHz bit rate.
L 96kHz Indicator: This indicator lights when the
input source has a 96kHz bit rate.
AVR 7200 OM 1/27/03 4:46 PM Page 7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon AVR7200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR7200 in the language / languages: English as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info