Manual Harman Kardon AVR645 (page 13 of 68) (English)

502558

Zoom out

Zoom in

1/68

MAIN REMOTE CONTROL FUNCTIONS 13

ENGLISH

Preset Up/Down: When the tuner is in

use, press these buttons to scroll through the sta-

tions programmed into the AVR’s memory.When

CD or DVD is selected using the Input Selector

button

, these buttons may function as Slow

Fwd/Rev (DVD) or ”+10” (CD, CDR).

Clear Button: Press this button to clear

incorrect entries when using the remote to directly

enter a radio station’s frequency.

Memory Button: Press this button to enter

a radio station into the AVR’s preset memory. Two

underline indicators will flash at the right side of

the Main Information Display

, you then

have five seconds to enter a preset memory

location using the Numeric Keys

. (See

page 51 for more information.)

Delay Select Button: This button selects

adjustments to the A/V Sync Delay and the indi-

vidual channel displays. The first press of the but-

ton displays an

A/V SYNC DELAY message

in the Lower Display Line

and in the on-

screen display, which means that you may

change the amount of time that all channels are

delayed together behind the video. This enables

you to compensate for the loss of lip sync that

may be caused by digital video processing in your

display or by television stations. To change the

A/V Sync Delay, press the Set Button

while

the

A/V SYNC DELAY message is visible

and then use the

⁄

Navigation Button

to change the setting so that the sound and the

video image are in sync. To change the delay for

an individual output channel, press the

⁄

Navigation Button

until the desired chan-

nel name is shown, and then press the Set

Button

. Use the

⁄

Navigation

Buttons

to change the delay amount. (See

page 35 for more information on delay options.)

Program Button: This button is used to

begin the process of programming the remote.

Press and hold this button for three seconds to

place the remote in the programming mode.

Once the red LED under the Set Button

lights, release the button. You may then select

from the desired option. (See pages 53-61 for

more information on configuring the remote.)

Speaker Select: Press this button to begin

the process of configuring the AVR’s Bass

Management System for use with the type of

speakers used in your system. Once the button

has been pressed, use the

⁄

buttons

select the channel you wish to set up. Press the

Set Button

and then select the speaker

type (Large, Small or None) appropriate with the

speaker in use. (See page 21 for more informa-

tion.)

Multi-Room: Press this button to activate

the Multiroom system or to begin the process of

changing the input or volume level for the sec-

ond zone. (See page 49 for more information on

the Multiroom system.)

Volume Up/Down: Press these buttons to

raise or lower the system volume.

EzSet/EQ Button: Press this button to turn

the filters used by EzSet/EQ on or off.This allows

you to hear the difference in system performance

when EzSet/EQ is engaged or out of the signal

path.

Channel Up/Down Selector: This button

has no function when the AVR is being con-

trolled, but when programmed for use with a

VCR, TV, cable box, satellite receiver or other sim-

ilar product it will change the channel up or

down. See pages 53-61 for more information on

programming the remote.

Mute: Press this button to momentarily

silence the AVR or TV set being controlled,

depending on which device has been selected.

When the AVR remote is being programmed to

operate another device, this button is pressed with

the Input Selector button

to begin the pro-

gramming process. (See page 53 for more infor-

mation on programming the remote.)

Tone Control Button: This button controls

the tone mode settings, enabling adjustment of

the bass and treble boost/cut. You may also use

it to take the tone controls out of the signal path

completely for “flat” response. The first press of

the button displays a

TONE IN message in the

Lower Display Line

and in the on-screen

display. To take the controls out of the signal

path press either of the

⁄

Navigation

Buttons

until the display reads TONE

OUT

. To change the bass or treble settings,

press the button again until the desired option

appears in the Lower Display Line

and in

the on-screen display and then press either of

the

⁄

Navigation Buttons

to enter the

desired boost or cut setting. See page 27 for

more information on the tone controls.

Main Remote Control Functions

29851_AVR645_ENG 30/10/06 9:46 Side 13

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR645 in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon AVR645

Harman Kardon AVR645 User Manual - German - 68 pages

Harman Kardon AVR645 User Manual - Dutch - 68 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Harman Kardon AVR645 Manual

Product: