502646
33
Zoom out
Zoom in
Previous page
1/47
Next page
Programming the Remote
To find out what function a particular
button has for a specific device, find
the button number on the Function List
and then look in the column for the
device you are controlling. For example,
button number 5 is the Test Tone button
for the AVR45, but it is the “Favorite”
button for many VCRs and Satellite
receivers. Button number 31 is the
Preset Tune Down button for the AVR45,
the “Reverse Skip” button for CD players
and the “Page Down” button for some
cable boxes.
Notes on Using the AVR45 Remote With
Other Devices.
• Manufacturers may use different code
sets for the same product category. For
that reason, it is important that you
check to see if the code set you have
entered operates as many controls as
possible. If it appears that only a few
functions operate, check to see if
another code set will work with more
buttons.
• When a button is pressed on the AVR45
remote, the red light under the
Device Control Selector b for
the product being operated should
flash briefly. If the Device Control
Selector flashes for some, but not all
buttons for a particular product, it
does NOT indicate a problem with the
remote, but rather that no function is
programmed for the button being
pushed.
Macro Programming
The Power button may be programmed to
send out a sequence of up to eight com-
mands when it is pushed. This enables
you to turn on a number of products,
and to have a program source turn to a
favorite channel or any other command.
To program a macro into the Power
button, follow these steps:
1. Press any of the Device Control
Selectors b and the Mute
button d at the same time until
the red light under the Device Control
Selector turns on.
2. Press the Power button c and
note that the Device Control Selector
will blink once.
3. Enter up to eight macro steps, by
pressing the Device Control button
and then the function button for each
step you wish to enter. To enter the
“Power On/Off” command during
macro programming, press the Mute
button d. DO NOT press the actual
Power Button.
4. When the eight steps have been
entered, press the Sleep button `
to enter the commands. The red light
under the Device Control Selector
will blink and then turn off.
Example: To program your TV,
Cable Box and the AVR45 to turn on
when the Power button is pressed,
first press-and-hold the AVR a
and Mute buttons d until the
red light comes on under the AVR
button. Next, press the Mute button
d to enter the Power command
for the AVR. Press the TV Device
Control Selector b to select
the TV mode, and then press the
Mute button d again, to select
TV Power. Finally, press the CBL
Device Control Selector b
followed by the Mute button d to
select Cable Power. Press the Sleep
button ` to enter the commands.
30
123
74
8
56
12
141615
9
10 11
13
17
21 22 23 24
28272625
29
33 34 35 36 37
42
43 44 45 46
4847
41403938
30 31 32
18 19 20
AVR45 om (G).Eng,Fr 4/16/99 11:41 AM Page 30
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon AVR45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR45 in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info