he following controls and jacks are located behind the front-panel door.To open the door, place the edge of a finger on the left or right edge of the panel and gently swing the
door down toward you.
AMain Power Switch: Press this switch to apply
power to the AVR 445.When the switch is pressed
in,the unit is placed in a Standby mode,as indicated
by the amber illumination surrounding the
Standby/On
Switch
1.This button MUST be pressed in to
operate the unit.To turn the unit off and prevent the
use of the remote control, this switch should be
pressed until it pops out from the front panel so that
the word “OFF”may be read at the top of the switch.
NOTE: This switch is normally left in the “ON” position.
BHeadphone Jack:This jack may be used to lis-
ten to the AVR 445’s output through a pair of head-
phones.Be certain that the headphones have a stan-
dard 1/4" stereo phone plug,or that you use an
adapter,as needed,to convert the plug on your head-
phones to the 1/4" jack used on the AVR.When the
headphone jack is in use,the main room speakers
will automatically be turned off and the unit will
output a standard stereo signal.You may also use
the Dolby Headphone mode for an enhanced
listening experience.
CTone Mode Button:This button controls the tone
mode settings,enabling adjustment of the bass and
treble boost/cut.You may also use it to take the tone
controls
out of the signal path completely for “flat”
response.The first press of the button displays a
TONEMODEmessage in the Lower Display
Line
$and in the on-screen display.To take the
controls out of the signal path,press either of the
‹/›Buttons Huntil the display reads TONE
OUT
.To change the bass or treble settings,press
the button again until the desired option appears in the
Lower Display Line $and in the on-screen display
and then press either of the
‹/›Buttons Hto
enter the desired boost or cut setting.See page 35
for more information on the tone controls.
DSpeaker Selector Button: Press this button
to begin the process of manually configuring the
AVR 445 for the type of speakers it is being used
with.For complete information on configuring the
speaker settings,see page 29.
EChannel Adjust Selector:Press the button to
begin the process of manually adjusting the channel
level outputs using the source currently playing
through your AVR.For complete information on
adjusting the channel output level,see page 41.
FDigital Input Selector: Press this button to begin
the process of selecting a digital source for use with
the currently selected input.Once the button has been
pressed,use the
‹/›Buttons Hto choose the
desired input and then press the
Set Button Ito
enter the setting into the unit’s memory. See page 35
for more information on digital audio.
GDelay Adjust Selector: Press this button to begin
the process of adjusting the delay settings.See page
30 for more information on delay adjustments.
H‹/›Buttons: When making system configura-
tion changes using the front-panel controls,press
these buttons to scroll through the available choices
for the option being adjusted.
ISet Button:When making system configuration
changes using the
front-panel controls,press this but-
ton to enter a setting into the unit’s memory.
JEzSet/EQ Microphone Jack: Before starting the
EzSet/EQ automated setup process,plug the micro-
phone into this jack.
The microphone does not need
to be plugged in at other times.
KOptical 4 Digital Input: Connect the optical digital
output of an audio or video product to this jack.
LCoaxial 4 Digital Input: Connect the coaxial
digital output of a digital audio product such as a
portable audio player or video game to this jack.
MInput/Output Status Indicator:This LED
indicator will normally light green to show that the front-
panel
Video 4 Input/Output Jacks Nare operating
as inputs
.When these jacks are configured for use as
outputs,the indicator will turn red to show that the jack
may be used as an output for recording.(See pages 22
and 40 for more information on configuring the front-
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Harman Kardon AVR445 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Harman Kardon AVR445 in the language / languages: English as an attachment in your email.
The manual is 1,38 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
