Manual Harman Kardon AVR40 (page 11 of 24) (English)

502645

Zoom out

Zoom in

1/24

Rear Panel Connections

¡ CD Input: Connect the output of

your CD player or D/A converter to

these jacks.

™ TV Input: Connect the audio

outputs of a TV, satellite receiver or

any audio source to these jacks.

£ Tape 2 Input: Connect the

PLAY/OUT jacks of an audio tape

recorder to these jacks.

¢ Tape 2 Output: Connect the

RECORD/INPUT jacks of an audio

tape recorder to these jacks.

∞ Tape 1 Monitor Input: Connect

the PLAY/OUT jacks of an audio

tape recorder to these jacks.

§ Tape 1 Monitor Output: Connect

the RECORD/INPUT jacks of an

audio tape recorder to these jacks.

NOTE: The recorder connected to

the Tape 1/Mon jacks may be moni-

tored during a recording session by

pressing the Tape 1/Mon button

8d on the front panel or remote.

¶ Video 2 A/V Inputs: Connect the

audio and video PLAY/OUT jacks of

a VCR, DVD, LV, Satellite system or

other video source to these jacks.

• Video 1 A/V Inputs: Connect the

audio and video PLAY/OUT jacks of

your main VCR to these jacks.

ª Video 1 A/V Outputs: Connect

the audio and video REC/IN jacks of

your main VCR to these jacks.

NOTE: The Video 1 jacks may be

used for any video source, but when

used with a VCR they will permit

dubbing from one source to another

while a separate source is being

listened to by selecting the VCR

Dubbing switch ˘

‚ Video Monitor Output: Connect

this jack to the video input of a TV or

video projector to view the selected

source.

⁄ Rear Speaker Outputs: Connect

these terminals to the input terminals

on your rear/surround speakers.

IMPORTANT NOTE: A speaker must

be connected to both of these out-

puts in order for the unit to function

properly. If only one speaker is con-

nected there will be no rear channel

output.

¤ Front Right Speaker: Connect

the front right channel speaker to

these terminals.

‹ Front Left Speaker: Connect the

front left channel speaker to these

terminals.

› Center Speaker: Connect the

center channel speaker to these

terminals.

ﬁ Unswitched Accessory AC

Power Outlet: This outlet provides

AC power that may be used for any

AC device up to 100 watts. The

power will remain on at this outlet

regardless of whether the AVR40 is

on or off.

ﬂ Switched Accessory AC Power

Outlets: These outlets provide AC

power only when the AVR40 is

turned on. Note that the total current

draw of the products may not

exceed 100 watts.

‡ AC Power Cord: Connect this

plug to an unswitched, wall mounted

AC outlet.

° Remote Control Extension

Output: This jack may be connect-

ed to other compatible Harman

Kardon products so that they will

receive infrared commands cap-

tured by the AVR40’s remote sensor.

· Remote Control Extension

Input: If the AVR40’s front panel IR

sensor is blocked due to cabinet

doors or other obstructions, an

external IR sensor may be used.

Connect the output of the sensor to

this jack.

a Subwoofer Outputs: Connect

these jacks to the line level input of a

powered subwoofer, or to the inputs

of a subwoofer amplifier.

NOTE: This output is a full range

left/right signal. For proper operation

BOTH jacks must be connected to

the left/right inputs of a powered

subwoofer, or a “Y” cable must be

used to connect the two outputs

together if a single input mono sub-

woofer is used.

WARNING: Since this is a full range

output, the signal must be sent

through a crossover or low pass filter

before being used with a passive

subwoofer or other speaker that

does not contain a built in crossover.

b Front Preamp Outputs: These

jacks provide the output for the front

left and right channels to an ampli-

fier. In normal operation, unless an

external power amplifier is used, the

jumper pins should remain connect-

ed to the Front Main In jacks c.

c Main In: These jacks are the

input to the AVR40’s front left/right

channel power amplifier. Unless an

external power amplifier is used for

the left/right channels, the jumper

pins should remain connected to

the Front Pre Out jacks b.

d Rear (Surround) Outputs:

These jacks may be used to connect

the rear/surround channels to an

external power amplifier or to the

inputs of the AVR40’s main left/right

channel amplifier.

e Center Preamp Outputs: These

jacks may be used to connect the

center channel output to an external

power amplifier.

NOTE: In most applications only one

center channel connection will be

required. The output of both jacks is

identical, and either jack may be

used for system connections.

f AM Antenna Input: Connect the

AM loop antenna supplied with the

AVR40 to these terminals. An exter-

nal AM antenna may also be con-

nected here.

g FM Antenna Input: Connect an

FM antenna to these terminals. Note

that a 300 ohm to 75 ohm adapter is

required for connections from twin

lead dipole antennas.

AVR40 rev (j) 4/16/97

•AVR40 om (j).qx 9/15/98 3:47 PM Page 8

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR40 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Harman Kardon AVR40 Manual

Product: