• Stereo or Mono program material• The surround decoder may not create center- or rear-channel
information from nonencoded programs
Unit does not respond to• Weak batteries in remote• Change remote batteries
remote commands• Wrong device selected• Press the AVR selector
• Remote sensor is obscured• Make certain front panel sensor is visible to remote
or connect remote sensor
Intermittent buzzing in tuner• Local interference• Move unit or antenna away from computers, fluorescent
lights,motors or other electrical appliances
Letters flash in the channel indicator• Digital audio feed paused• Resume play for DVD
display and digital audio stops• Check that Digital Input is selected
In addition to the items shown above,additional information on troubleshooting possible problems with your AVR 340,or installation-related issues, may be found in the list of
“Frequently Asked Questions”which is located in the Product Support section of our Web site at www.harmankardon.com.
Processor Reset
In the rare case in which the unit’s operation or the dis-
plays seem abnor
mal,
the cause may involve the erratic
operation of the system’
s memor
y or microprocessor.
To correct this problem,first unplug the unit from the
AC wall outlet and wait at least three minutes. After the
pause,reconnect the AC power cord and check the
unit’s operation.If the system still malfunctions, a sys-
tem reset may clear the problem.
T
o clear the
A
VR 340’s entire system memory includ-
ing tuner presets,output level settings, delay times
and speaker configuration data,first place the AVR in
Standby Mode,and then press and hold the
Tone
Mode Button
5button for three seconds
.
The unit
will turn on automatically.
NOTE: Resetting the processor will erase any configu-
ration settings you have made for speakers,output
levels
,
surround modes and digital input assignments,
as well as the tuner presets.Before performing a
processor reset,
we suggest that you record your
current system settings on the worksheet found on
page 66.The unit will be returned to the factory
presets,and all settings for these items must be
reentered.
If the system is still operating incorrectly, there may
have been an electronic discharge or severe
AC line
interference that has corrupted the memory or
microprocessor
.
If these steps do not solve the problem,consult an
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Harman Kardon AVR340 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Harman Kardon AVR340 in the language / languages: English as an attachment in your email.
The manual is 1,38 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
