502598
36
Zoom out
Zoom in
Previous page
1/54
Next page
36
AUDIO EFFECTS / ADVANCED FEATURES
Cross Color Suppressor
: Turn this setting on to remove cross color
artifacts, which can occur when high-frequency luminance (brightness)
signals are misinterpreted as chroma (color) signals, which can cause
unwanted flickering, flashing colors or rainbow patterns.
Film Mode Detect
: While normally left off, turn this setting on to
compensate for authoring errors in the process of converting film programs
to video.
Return to main Video Modes Menu by pressing Back/Exit
Brightness
: This control adjusts the level at which black is delivered. We
recommend leaving it at its factory setting, although there is no harm in
experimenting if you are using a test signal.
Contrast
: This control adjusts the difference between black and white in the
picture. We recommend leaving it at its factory setting, although there is no
harm in experimenting if you are using a test signal.
Color
: This control adjusts the hue of the colors in the picture, and may
be set between 0 and 100. Select a setting in which people and objects on
screen look natural. There is no recommended” setting, and no harm in
experimenting.
Sharpness
: You may adjust the Sharpness setting from 0 to 100. We
recommend leaving this setting as low as possible, as contrary to what you
might expect, a less sharp image can appear clearer on screen. In addition,
increasing the Sharpness requires additional video processing, which may
lead to loss of sync with the audio or visual artifacts. However, there is no
harm in experimenting with this setting.
AUDIO EFFECTS
Depending on the specific characteristics of your listening room, you may
wish to adjust some of the audio settings, such as tone controls, to improve
performance. Access these settings from the Audio Effects menu. Press the
Audio Effects Button on the front panel or remote, and the screen shown
in Figure 19 will appear. The menu may also be accessed from the Setup
Source menu by pressing the Info Settings Button and selecting the
Audio
Effects
line.
NOTE
: The settings in the Audio Effects menu affect each source
independently.
Figure 19 – Audio Effects Menu
Tone Control
: This setting determines whether the treble and bass
controls are active. When it’s off, the tone controls are “flat”, with no changes.
When it’s on, the bass and treble frequencies are boosted or cut depending
upon the tone-control settings. When an analog audio source is in use and
the 2-Channel Stereo surround mode is selected, setting the Tone Control to
“Off places the unit in analog bypass mode, with no digital processing of the
analog signal.
Treble
: Boost or cut the high frequencies by up to 10dB by using the
M N
Buttons to change the temperature bar setting. The default setting is 0dB, at
the center of the temperature bar.
Bass
: Boost or cut the low frequencies by up to 10dB by using the
M N
Buttons to change the temperature bar setting. The default setting is 0dB, at
the center of the temperature bar.
LFE Trim
: lets you reduce the output to the separate subwoofer channel by
up to 10dB in 1dB steps, if the general level to the sub set up in the Speaker
Setup Menus seems too loud for a particular Source.
Night Mode
: This setting is used with specially encoded Dolby Digital
programs to compress the signal so that louder passages do not disturb
others, while dialogue remains intelligible.
Off
: For normal listening.
Half
: Applies moderate compression.
Full
: Applies the most compression.
When you have finished making adjustments in the Audio Effects menu, press
the Audio Effects Button or the Back/Exit Button to clear the screen.
ADVANCED FEATURES
The AVR 260 is equipped with a number of ad vanced features that add
extra flexibility to the unit’s operation. While it is not necessary to use these
features to operate the unit, they provide additional options that you may
wish to use.
System Settings
The AVR 260 offers system settings that allow you to make the receiver easier
to use rather than directly affecting performance. These settings may be
accessed from the System Settings menu, which is selected by pressing the
AVR Button and navigating to the System line. Press the OK Button to display
the System Settings menu. See Figure 20.
Figure 20 – Systems Settings Screen
Front Panel Dimmer
: Some people find the front-panel messages
distracting while watching a movie. The AVR 260 allows you to dim the
front-panel lighting or turn it off altogether. When the display is partly or
fully dimmed, it will return to full brightness for five seconds whenever a
command is entered, and then it will dim again. Select On 100% for full
brightness, dim to 50% or 25% of full brightness or select Off to fully darken
the display. The light inside the Volume Control will go out when the display
is partly or fully dimmed, but the Power Indicator will always remain lit to
remind you that the AVR is powered on.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon AVR260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR260 in the language / languages: English as an attachment in your email.

The manual is 2,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon AVR260

Harman Kardon AVR260 User Manual - German - 54 pages

Harman Kardon AVR260 User Manual - Dutch - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info