502598

Harman Kardon AVR260 Manual

23
Zoom out
Zoom in
Previous page
1/54
Next page
23
ENGLISH
SYSTEM CONFIgURATION
If you previously saved EzSet/EQ results in this setup position and you wish to
reconfigure the speakers from scratch, select the Reset option.
For best results, we recommend configuring the speakers in this order,
although it may differ from the order in which the submenus appear in the
Manual Speaker Setup menu: Number of Speakers, Crossover(Size), Sub
Mode, Distance and Level Adjust.
Number of Speakers
Move the cursor to the Number of Speakers line and press the Set Button. See
Figure 10.
Figure 10 – Number of Speakers Menu
The Number of Speakers menu lists each of the speaker groups.
Program the correct setting for each group: ON when the speakers are present
in the system, and OFF for positions where no speakers havebeen installed.
The Front Left & Right speakers are always ON and may not be disabled.
Any changes made to the system configuration will be reflected in the total
number speakers displayed at the top of the screen.
The setting for the surround back speakers includes a third option: Zone 2. The
AVR 260 is among the few receivers in its class that is capable of multizone
operation, allowing placement of a pair of speakers in another room with
listeners in the remote room enjoying either the same program as in the
main room or a different source. The AVR’s assignable surround back amplifier
channels make multizone operation easier than ever, since an external power
amplifier is no longer required. Simply select the Zone 2 option at this line,
and connect the Surround Back Speaker Outputs to loudspeakers located in
the remote room. The main room will be configured automatically for up to
5.1channels. See the Multizone Operation section for more information.
The settings in this menu affect a number of aspects of the AVR’s operation,
including the remainder of the speaker setup process and the availability of
various surround modes at any time.
When you have finished programming the number of speakers in the system,
select the Back option to insure the settings are saved correctly.
You may use the Back/Exit Button, and the settings will be saved.
Adjust Crossover Frequencies Menu
After you have programmed the number of speakers in the system, the
AVR will return to the Manual Speaker Setup menu. Navigate to the
Crossover (Size) line and press the OK Button to display the Adjust Crossover
Frequencies menu (see Figure 11).
Figure 11 – Adjust Crossover
Frequencies Menu
The AVR will only display those speaker groups which you programmed in the
Number of Speakers menu.
Refer back to Step One, where you determined each speaker’s crossover.
Again, for the main speakers, this is the lowest frequency the speaker
reproduces well; and for the subwoofer, it’s the highest.
For each main speaker, select one of the seven crossover frequencies: 40Hz,
60Hz, 80Hz, 100Hz, 120Hz, 150Hz or 200Hz. If the crossover frequency
you determined in Step One is below 40Hz, select the first option, “Large”.
This setting doesn’t refer to the speaker’s physical size, but to its frequency
response, which is also called “full range”. This means the speaker is capable
of playing sounds throughout the frequencyspectrum, from the high pitches
to the bass.
Specify the size of the subwoofer’s transducer as 8, 10, 12 or 15 inches.
Make a note of each speaker group’s crossover setting in Table A3 in the
appendix.
When you have finished entering the settings, remember to select
Back
, not
to press the Exit Button.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Harman Kardon AVR260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Harman Kardon AVR260 in the language / languages: English as an attachment in your email.

The manual is 2,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Harman Kardon AVR260

Harman Kardon AVR260 User Manual - German - 54 pages

Harman Kardon AVR260 User Manual - Dutch - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info